United States - Z1da--528a6-19-605 replace building 76 roofs

Description

SCOPE OF WORK
Project No. 528A6-19-603
Replace Existing Roof Building 76
Construction Services

Bath VA Medical Center 76 Veterans Avenue Bath, NY 14810
The general scope of this project is for construction services to remove the existing natural
slate shingles and replace with an approved synthetic slate product, install a new electrical
ice melt system as specified and shown on the construction documents for building 76
which is the main hospital building at the VA Medical Center located in Bath, New York.
Work shall address but not limited to existing roof removal, penetrations, flashing, and
structural support of new artificial slate roofing. The building is listed as historical
buildings at the VA Medical Center located in Bath, New York.

EXISTING CONDITIONS
The existing six story structure was constructed in 1938. The existing Building 76 roof is
approximately 31,000 square feet, made up of 4 distinct sections: The North wing, Center
Portion, South Wing, and the Annex Addition. The North and South wings are six stories
with attic space under the wood framed sloped roof. The Center portion is 7 stories with
attic space under the wood framed sloped roof. The Annex addition is a two-story building
also with a wood framed sloped roof. All roof sections have a built-in gutter system lined
with copper sheeting. The existing downspouts are located along the interior face of the
exterior wall chases. All roof slopes are approximately 8:12.

Construction will include, but is not limited to:
Complete removal of existing slate roofing system including
1. all flashing,
2. underlayment, and
3. certain other items.
4. The work involves the removal and disposal of asbestos containing materials and lead
containing materials.

Complete installation of new synthetic slate product including
1. all flashing
2. underlayment
3. certain other items

Safety Measures:
1. Submit safety plan indicating how the contractor intends to prevent falling debris
during demolition and new installation.

Electrical Work:
1. Install power and systems required for the installation and operation of specified ice
melt system.
The Contractor shall supply:
1. All the materials, tools, labor, and supervision to complete this project as required on
the contract drawings and in the specifications.
2. Contractor will adhere strictly to the plans and specifications unless directed
otherwise by the CO in writing.
3. The work will include all trades for general building construction. The trades used
will include but are not limited to:
a. Electrical
b. Mechanical
c. Carpentry
d. Plumbing

Opportunity closing date

30 April 2024

Value of contract

to be confirmed