Germany - Various medical devices and products

Description

Establishment of a Dynamic Procurement System (DBS)The DBS is carried out in two phases:1.Establishment and management of a bidder poolThe DBS is set up for the duration specified in Section 1.2 and for the medical devices service spectrum. The procedure is carried out exclusively electronically. The contracting authority shall establish a pool of bidders.Any interested party may activate participation in the procedure and submit a request to participate at any time during the DBS. Any interested party that meets the eligibility criteria published in the contract notice is included in the bidder pool. He thus becomes a potential bidder and may submit a bid in the subsequent individual awards.The bidder pool is not limited in size. Each qualified participant will be included in the bidder pool.2.Bidding phaseThe actual procurements will be made in the form of individual awards as required by the contracting authority during the bidding phase. The contracting authority decides on the timing or number of individual awards. It is expressly pointed out that there is no obligation on the part of the contracting authority to carry out individual awards.On the occasion of the individual award, the contracting authority invites all participants in the bidder pool admitted to the DBS to submit a bid and informs them of the specific terms of the contract (e.g. quantity, delivery time, place of delivery, award criteria, etc.), provided these have not already been published in the notice. By submitting a tender, the tenderer declares that no changes will be made to the suitability criteria. The content of the tenders received will be examined on the basis of the award criteria published. The bidder with the most economical bid to be determined on the basis of the notified award criteria will be awarded the contract.Participants admitted to the DBS bidder pool are not obliged to submit a bid in the context of the individual awards.Participants must always keep themselves informed of the current status of the award procedure (the individual award). Any extensions of deadlines, applicant questions with the corresponding answers or other updates and changes must be retrieved independently by the participant from the federal e-award platform. Any changes will be announced immediately by the contracting authority.
Within the framework of the DBS, it is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials.The respective total demand over the term of the DBS and the annual demand 2021 for a product represent forecast values.It is expressly noted that additional products / product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setA. Injection and infusion materials- Disposable syringe, 10ml, total requirement approx. 1 300 700 EA, requirement 2021 approx. 385 400 EA,- Disposable safety cannula 18G, total requirement approx. 514 300 EA, requirement 2021 approx. 280 900 EA,- Disposable safety cannula 20G, total requirement approx. 399 500 EA, requirement 2021 approx. 160 600 EA,- Perfusor line 150cm, total requirement approx. 157 000 EA, requirement 2021 approx. 118 740 EA,- Drop regulator, total requirement approx. 23 500 EA requirement 2021 approx. 20 400 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials, under the DBS.The respective total demand over the term of the DBS and the annual demand 2021 for a product represent forecast values.It is expressly noted that additional products / product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setB. Drainage system and accessories- Drainage system according to Robinson CH 26, total requirement approx. 27 300 EA, requirement 2021 approx. 27 960 EA,- Suction tube with finger dip CH 25, total requirement approx. 27 200 EA, requirement 2021 approx. 16 800 EA,- Thorax drainage valve, total requirement approx. 16 000 EA, requirement 2021 approx. 14 640 EA,- T-tube to Kehr 4.0 mm 70 X 16 cm, total requirement approx. 4 700 EA, requirement 2021 approx. 4 200 EA,- Sengstaken-Blakemore probe CH 16, total requirement approx. 2 000 EA, requirement 2021 approx. 1 300 EA. It is intended to contract a total of approx. 61,000,000 units of mainly non-active medical products, e.g. injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, surgical materials, medical devices and accessories, nursing products (MP) and dressing materials under the DBS.The respective total demand over the term of the DBS and the annual demand 2021 for a product represent forecast values.It is expressly noted that additional products / product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setC. Medical catheters, tubes and accessories- Disposable suction catheter 12CH, total requirement approx. 67 200 EA, requirement 2021 approx. 53 400 EA,- Yankauer surgical aspirator, total requirement approx. 27 900 EA, requirement 2021 approx. 25 200 EA,- Endotrachelatubus size 7,0 CH 29, total requirement approx. 20 830 EA, requirement 2021 approx. 15 630 EA,- Nelaton urinary catheter, total requirement approx. 14 960 EA, requirement 2021 approx. 11 760 EA,- Epistaxis catheter, total requirement approx. 4 700 EA, requirement 2021 approx. 4 200 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials under the DBS.The respective total demand over the term of the DBS and the annual demand 2021 for a product represent forecast values.It is expressly noted that additional products / product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setD. Laboratory materials/In-vitro diagnostics- Urine specimen container, total requirement approx. 37,940 SE, requirement 2021 approx. 8,400 SE,- Swab specimen container, total requirement approx. 10,400 EA, requirement 2021 approx. 8,400 EA,- Swabs with transport medium, total requirement approx. 13,740 EA, requirement 2021 approx. 1 440 EA,- Urine test for bacteria, total requirement approx. 1 800 PG, requirement 2021 approx. 1 470 PG,- Rapid pregnancy test, total requirement approx. 1 660 EA, requirement 2021 approx. 20 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials under the DBS.The respective total requirements over the term of the DBS and the annual requirements in 2021 for a product represent forecast values.It is expressly noted that additional products/product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setE. Surgical instruments and accessories- Safety scalpel Fig. 21, total requirement approx. 66 190 EA, requirement 2021 approx. 55 670 EA,- Disposable artery clamp according to Pean, straight 145 mm, total requirement approx. 22 450 EA, requirement 2021 approx. 15 000 EA,- Disposable anatomical forceps according to Adson 120 mm, total requirement approx. 23 402 EA, requirement 2021 approx. 6 000 EA,- Disposable needle holder Crile-Wood 200 mm, total requirement approx. 4 950 EA, requirement 2021 approx. 4 200 EA,- Disposable surgical scissors, straight, pointed/blunt, 145MM, total requirement approx. 9 300 EA, requirement 2021 approx. 3 000 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials, under the DBS.The respective total requirements over the term of the DBS and the annual requirements in 2021 for a product represent forecast values.It is expressly noted that additional products/product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setF. OR materials- OR drape 75 X 90 cm, total requirement approx. 91 240 EA, requirement 2021 approx. 85 840 EA,- Perforated drape, adhesive 75 X 90 cm, total requirement approx. 53 320 EA, requirement 2021 approx. 42 720 EA,- Instrument table cover 80X145cm, total requirement approx. 35,800 EA, requirement 2021 approx. 21,000 EA,- incision drape 90X85cm, total requirement approx. 18 400 EA, requirement 2021 approx. 16 800 EA,- surgical drape, table 100 X 150 cm, total requirement approx. 15 400 EA, requirement 2021 approx. 13 200 EA,- Abdominal cloth, sterile 45 X 45 cm, total requirement approx. 53 320 EA, requirement 2021 approx. 49 920 EA,- Vinyl disposable gloves size L, total requirement approx. 313 340 PG, requirement 2021 approx. 158 470 PG,- Nitrile disposable gloves size. XL, total requirement approx. 112 980 EA, requirement 2021 approx. 88 980 EA,- surgical cap, total requirement approx. 3 050 EA, requirement 2021 approx. 1 050 EA,- disposable apron 80 x 160 cm, total requirement approx. 5 000 EA, requirement 2021 approx. 1 200 EA. It is intended to contract a total of approx. 61,000,000 units of mainly non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials within the framework of the DBS.The respective total requirements over the term of the DBS and the annual requirements in 2021 for a product represent forecast values.It is expressly noted that additional products/product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setG. Medical devices and accessories- Blood pressure monitor, total requirement approx. 2 730 EA, requirement 2021 approx. 1 360 EA,- Finger pulse oximeter, total requirement approx. 2 420 EA, requirement 2021 approx. 2 210 EA,- Inhalation oxygen mask, total requirement approx. 18 650 EA, requirement 2021 approx. 11 170 EA,- Disposable peep valve, total requirement approx. 10 170 EA, requirement 2021 approx. 8 650 EA,- Manual aspirator, total requirement approx. 21 860 EA, requirement 2021 approx. 15 500 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials, under the DBS.The respective total demand over the term of the DBS and the annual demand 2021 for a product represent forecast values.It is expressly noted that additional products / product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setH. Nursing products- tourniquet, total requirement approx. 82,930 EA, requirement 2021 approx. 66 150 EA,- full body blanket 114 X 182 cm, total requirement approx. 36 170 EA, requirement 2021 approx. 33 870 EA,- cold-hot compress 13 X 14 cm, total requirement approx. 25 150 EA, requirement 2021 approx. 17 900 EA,- Warm blanket Ready Heat, 6 elements, total requirement approx. 10 600 EA, requirement 2021 approx. 7 000 EA,- Mouth care sticks, total requirement approx. 33 000 EA, requirement 2021 approx. 18 000 EA,- Crutch, total requirement approx. 8 260 EA, requirement 2021 approx. 1 740 EA. It is intended to contract a total of approx. 61,000,000 units of essentially non-active medical products, for example from the application areas of injection and infusion materials, drainage systems and accessories, medical catheters and tubes with accessories, laboratory materials/in-vitro diagnostics, surgical instruments and accessories, operating theatre materials, medical devices and accessories, nursing products (MP) and dressing materials, under the DBS.The respective total requirements over the term of the DBS and the annual requirements in 2021 for a product represent forecast values.It is expressly noted that additional products/product groups may be placed through individual awards.Legend: EA = piece, PG = pack, SE = setI. Dressing materials- Gauze compress, sterile 10x10cm, total requirement approx. 2 790 680 EA, requirement 2021 approx. 1 627 340 EA,- Cannula plaster, total requirement approx. 550 400 EA, requirement 202 approx. 449,524 EA,- ES compress 16-fold 10.0 X 10.0 cm, total requirement approx. 369,400 EA, requirement 2021 approx. 24 000 EA,- Triangular cloth, olive, total requirement approx. 250 900 EA, requirement 2021 approx. 120 600 EA,- Bandage cloth, AL-coated 73 cm X 10 m, total requirement approx. 15 720 EA, requirement 2021 approx. 14 650 EA.

Opportunity closing date

25 April 2025

Value of contract

to be confirmed