United States - VALVE,HYDRAULIC

Description

Added: Jun 14, 2019 10:03 am

DLA Land and Maritime is preparing to solicit a one-time buy of 261 each of NSN 4810-01-096-1054, Valve, Hydraulic. The approved manufacturers and part numbers for this NSN are:

Eaton Aerospace, LLC (16780) p/n 13137
Sikorsky Aircraft Corporation (78286) p/n 70652-02450-108
Sources interested in becoming an approved source for this NSN must submit the appropriate information as outlined in DLAD L04 -- Offers for Part Numbered Items (2016). Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to Mandy Phipps-Kuhlman via email at mandy.phipps-kuhlman@dla.mil by 1:00 PM EST on 21 MAY 2019.
VALVE,HYDRAULIC
THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS
BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE
COVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIED
CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)>
AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION
(CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO
DFARS 252.204-7012.
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
 
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
 
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
 
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
 

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)
 
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
 
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
 
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms Regulations
(ITAR) or the Export Administration Regulations (EAR) and cannot be
exported without the authorization of either the Department of State or
the Department of Commerce prior to export. Export includes disclosure
of technical data to foreign nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees or U.S. companies and their foreign subsidiaries.
DLA has enhanced its Joint Certification Program (JCP) registration and
validation procedures. Selected National Stock Numbers (NSNs) will
require additional permissions to access the associated technical data.
In the event a vendor cannot access the technical data for a NSN in DLA
cFolders, the vendor must submit a onetime request to
jcpvalidation@dla.mil for technical data access consideration. If a
vendor has inquiries after having submitted required information to the
JCP office, these inquiries are to be directed to
DLAJ344DataCustodian@dla.mil.
DLA processes the vendor's technical data request on a first come, first
served basis. Failure to comply timely with required information may
result in lack of consideration for DLA solicitations. It is vitally
important that vendors provide correct company official name(s) and
contact information in all correspondence. DLA will work diligently on
validating vendor requests. Vendors will be notified within 3 business
days of when their requests were approved. However, DLA cannot
guarantee that it can complete all validation requests by the due date
for any solicitation responses.
 
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RT001: MEASURING AND TEST EQUIPMENT
 
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
CRITICAL APPLICATION ITEM
EATON AEROSPACE LLC DBA SOLENOID 16780 P/N 13137
Sikorsky Aircraft Corporation DBA 78286 P/N 70652-02450-108
IAW BASIC DRAWING NR 78286 70652-02450
REVISION NR W DTD 01/01/1939
PART PIECE NUMBER: 13137
IAW REFERENCE DRAWING NR 78286 70652-02450
REVISION NR N DTD 12/12/1989
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 78286 70652-02450
REVISION NR AJ DTD 03/18/2009
PART PIECE NUMBER:

Opportunity closing date

21 June 2019

Value of contract

to be confirmed