Poland - Surgical implants

Description

The subject of the order is the supply of transplantation materials to the L. Zamenhof University Children's Clinical Hospital in Bialystok, 17 J. Washington St., hereinafter referred to as the Ordering Party. A detailed description of the order is described in the Offer Form - Appendix No. 1 to the SWZ
1 Bioabsorbable flatfoot correction implant. Bioabsorbable screw for flatfoot correction implanted (screwed) into the heel bone in sizes 7/18 mm; 9/18 mm; 9/23 mm; head height 6.5 mm. Packaged sterile; pcs. 3 1 Bio-absorbable implant for cartilage splinting. Having teeth arranged along the periphery and a low profile head. Implant length 16,20,25mm and diameter 1.5mm and diameter 2.4mm in length 16, 25, 35, 45mm pcs pcs 602 Diamond drill, round long 3-4mm, sterile, 5 pcs per package pcs 603 Polymer thread with three eyelets used for pulling sutures prez tissue during arthroscopic procedures, sterile, collective package 8 pcs pcs 84 Ster kit. for meniscus suturing consisting of 4 longitudinal implants of 5x1 mm made of PEEK material. Four implants loaded on a disposable applicator with two bends of 0 and 15 degrees, which are connected by a strong thread in size "#0". The applicator having a thread locking system and inflicting tension between the implants. The system provided with a self-tightening knot with controlled pressure. The set is equipped with a disposable guide cannula, which protects implants from damage during insertion of the needle into the joint and serves as a measure of damage. pcs 55 Set of ster. for meniscus suturing consisting of 3 elongated implants of 5x1mm size made of PEEK material. Four implants loaded on a disposable applicator with two bends of 0 and 15 degrees, which are connected by a strong thread in size "#0". The applicator having a thread locking system and inflicting tension between the implants. The system provided with a self-tightening knot with controlled pressure. The set is supplied with a disposable guide cannula to protect implants from damage during insertion of the needle into the joint and to serve as a damage gauge. pcs 5 1 Self-drilling and self-tapping steel bone screws: thread diameter 1.65/2 mm, 4mm, 5mm, 6mm . Thread length from 12 to 70mm, overall length 45-250mm pcs 400 1 Unilateral Drive Rail External Stabilizer. Stabilizer that allows the supply of the lower limb with the possibility of mobilizing the knee and hip joint. The system consists of parts made of 316LVM stainless steel and aluminum. All parts are supplied non-sterile and are disposable. The stabilizer is designed for fracture dressing, reconstruction, axis correction, distraction and compression, and lower limb lengthening in adults and children. Distraction and compression mechanism operating on the basis of carriages on threaded guides. Hydroxyapatite-coated pins and uncoated pins are supplied with the stabilizer. Kit supplied with extension rails allowing for increased extension. With the set supplied instrumentation necessary to perform the procedure. pcs 8 1 All - inside meniscus suturing system. Implant with high pull-out strength min 70 N. The system is built with two soft implants made of threads connected to each other by an insoluble thread # 2-0 made of a core of polyester laced with UHMWPE - ultra high molecular weight polyethylene . The use of soft implants allows for perfect adaptation to the conditions of the tissue surface through which a solid and secure fixation is achieved. A pre-tied sliding knot in the implant suture sheath eliminates the need for arthroscopic knot tying. The implant design allows consecutive tightening of 2 individual mattress sutures. The implant needles are housed in a single ergonomic tool that allows one-handed implant insertion with any rotation. The implant knob, located in the handle, allows one-handed and reproducible implant delivery in different orientations of the tool. Implant drop and reload confirmed by an audible signal. The implant is equipped with an integrated depth stop of 10-18 mm (increasing in 2 mm increments), and is available in four different options: upward bend of 12 and 24 degrees, downward bend of 12 degrees and a straight version. The system allows the insertion of implants without pulling the handle out of the knee. pcs 502 Tibial fixation button convex hat-shaped titanium in three sizes of outer diameter 11mm,14mm and 20mm and in inner diameters of 4mm, 7mm and 9mm respectively. Buttons with two holes with a longitudinal notch for insertion of a loop, and in 14mm and 20mm outer diameter additionally with two holes for guiding a thread/tape. Implant in sterile version packaged individually. pcs 83 Knotless implant in Biocomposite and PEEK for stabilization of tissue in bone, cannulated, screw-in implant available in diameters 3.5mm x 15.8mm, 3.9mm x 17.9mm, 4.75mm x 19.1mm and 5.5mm x 19.1mm with PEEK start for graft attachment. Mounted on a disposable screwdriver with a marker to allow full inspection and evaluation of proper implant placement. Implant allows intraoperative control of tissue tension. Implant reloaded with one additional sliding suture thread allowing the insertion of an additional suture once the implant is fully locked into the bone. pcs 1104 "Twist-In cannula designed specifically for shoulder arthroscopy procedures for rotator cone reconstruction or suturing of the acetabular rim of the shoulder joint. Available in sizes:- with a diameter of 8.25 mm and a length of 70 mm- with a diameter of 8.25 mm and a length of 90 mm- with a diameter of 6 mm and a length of 70 mm- with a diameter of 6 mm and a length of 90 mm- with a diameter of 7 mm and a length of 70 mm" pcs 45 Implant in PEEK version for stabilization of shoulder joint instability, nodeless driven with a diameter of 3 mm and a length of 12.7 mm. Nodeless locking by means of a "Chinese loop" type system using thread #2 pcs 15The detailed description of the subject of the order is included in Annex No. 1 to the SWZ. 1 Drill wire with expandable end, allowing to drill canals in the reverse drilling system in diameters from 6 mm to 12 mm with 0.5 mm increments (without the 6.5 mm size). Drill with calibrated graduation and rubber cap for precise measurement of fecal length. Easy unfolding and folding of the drill with the desired diameter by turning the wheel on the handle at the distal end. Individually packaged, sterile. Dimensions: 3.5 mm diameter. pcs. 52 Tibial drilling wire with a diameter of 2.4 mm and a length of 311 mm. Individually packaged, sterile pcs. 13 Nitinol wire for interference screw with a diameter of 1.1mm. Etched markings on the wire in 25mm and 30mm lengths. Packaged sterile pcs 14 Strong non-absorbable thread of thickness #2, length 26", blue color, with double-core structure, polyethylene inner fibers and braided polyester outer fibers ending in a 1.5" loop. pcs 155 Drill wire. The wire has 30 laser markings every 5 mm to allow precise measurement of the length of the drilled canal. Individually packaged, sterile. Dimensions: diameter 3.5 mm, length 311 mm. pcs. 16 Meniscus suturing system using the inside-outside method. The system equipped with a flexible guidewire allowing intraoperative overlap and a nitinol needle with an eyelet - a disposable sterile set allows the placement of several meniscus sutures in one patient. Includes a tightening clamp to facilitate insertion of the needle into the tissue. Individually packaged, sterile pcs 107 Biocomposite implant. Threaded full-length screw with a diameter of 4.5mm and a length of 15mm. Screw with two USP2 thick non-absorbable threads, in different colors, with double-core structure, polyethylene inner fibers and braided polyester outer fibers. Screw set with threads on feeder. Feeder with markers indicating optimal implant anchorage depth. Separation of feeder from screw spontaneous after release of thread. Sterile. pcs 108 Biocomposite implant. Threaded full-length screw with a diameter of 5.5mm and a length of 15mm. Screw with two USP2 thick non-absorbable threads, in different colors, with double-core structure, polyethylene inner fibers and braided polyester outer fibers. Screw set with threads on feeder. Feeder with markers indicating optimal implant anchorage depth. Separation of feeder from screw spontaneous after release of thread. Sterile. pcs 109 Knotless implant in biocomposite and PEEK for tissue stabilization in bone, cannulated, screw-in implant available in 7mm, 8mm and 9mm x 19.5mm diameter with PEEK fork-shaped origin for graft fixation. Fork with additional holes for reloading auxiliary threads. Implant attached to a disposable screwdriver with markers allowing full inspection and evaluation of proper implant placement. Implant allows intraoperative ability to control tissue tension. Implant reloaded with one additional sliding suture thread allowing for additional suture placement once the implant is fully locked into the bone. pcs. 210 Genuine, single-use tips for Arthrex arthroscopic shaver. Straight shaver tips available in diameters of 3.5mm, 3.8mm, 4mm, 5mm, 5.5mm and length of 13 cm. Cutting blades for soft tissue in three variants: smooth on smooth, smooth on teeth and teeth on teeth. pcs. 80The detailed description of the subject of the contract is included in Annex No. 1 to the SWZ. 1. anatomical plate for the distal humerus, elbow and ulnar process variants a "Plate for the ulnar process . Anatomical reconstructive plate with a shape that reduces contact with the bone , locking and compression locking variable-angle. In the head of the plate thickened holes built with four threaded columns with the possibility of using variable-angle locking screws with deviation from the axis in each direction up to 15 degrees, with a diameter of 2.7mm, with threaded head or alternatively standard cortical screws with a diameter of 2.4mm. Locking screws with tapered threads on the head screwed in with a 0.8/1.2NM torque screwdriver. On the shank of the plate on the underside and side there are undercuts to facilitate domodeling of the plate. On the stem also dual-function, locking and compression holes with the possibility of using a single 3.5mm locking screw or a 3.5/4.0mm diameter cortical/sponge screw. The appropriate shape of the holes in the plate gives the possibility of inter-fracture compression and the longitudinal locking-compression hole allows vertical positioning of the plate. The shape of the holes on the core of the plate also allows the use of the trailing screw technique. The core diameter for the following screws: 3.5mm locking screws is 2.9mm; 3.5mm cortical screws is 2.4mm. Instrumentation equipped with: drills with AO tip; screwdriver inserts terminated with AO tip for AO type quick drill connector or 0.8/1.5NM dynamometer ; 0.8/1.5NM dynamometer with the possibility of attaching to AO type quick drill connector or external AO tip holder . Plate system works with perforated screws for 3.5mm augmentation. Steel implants made of MRI-approved material. Plates for the appendage available in three versions: small, medium and large tip for the ulnar appendage . Right and left plates:Appendectomy, Short 2 holes, 73mmAppendectomy, medium 2-6 holes, 90-142mmAppendectomy, long 6-12 holes 131-211mmElbow appendectomy, 2-6 holes, 90-142mm" pcs. 12b " Plates for the distal humeral epiphysis. The head of the plate has thickened holes constructed of four threaded columns with the possibility of using variable-angle locking screws with a deviation from the axis in each direction of 15 degrees, with a diameter of 2.7mm with a threaded head or alternatively standard cortical screws with a diameter of 2.4mm. Locking screws with tapered threads on the head are screwed in with a 1.2NM torque screwdriver. The shaft of the plate has dual-function, locking and compression holes with the possibility of using a single 3.5mm locking screw or a 3.5/4.0mm diameter cortical/sponge screw. The appropriate shape of the holes in the plate gives the possibility of inter-fracture compression and the longitudinal locking-compression hole allows vertical positioning of the plate. The shape of the holes on the core of the plate also allows the use of the trailing screw technique. The core diameter for the following screws: 3.5mm locking screws is 2.9mm; 3.5mm cortical screws is 2.4mm. Instrumentation equipped with: drills with AO tip; screwdriver inserts terminated with AO tip for AO type quick drill connector or 1.2/1.5NM dynamometer ; 1.2/1.5NM dynamometer with possibility to attach to AO type quick drill connector or external AO tip holder . Plate system works with perforated screws for 3.5mm augmentation. Steel implants. Made of material conditionally approved for MRI.The system includes: locking plates on the side: posterior side Detailed description of the subject of the contract is included in Annex No. 1 to the SWZ. Set of screws compatible with the Minirail system 1 Self-tapping cortical screws. Length 60/20mm, Diameter 3.3-3.0mm pcs 202 Self-Tapping Cortical Screws. Length 50/18mm, Diam. 3.0-2.5mm pcs. 203 Self-tapping cortical screws. Length 60/20mm, Diam. 3.0-2.5mm pcs. 204 Self-tapping cortical screws. Length 60/25mm, Diam. 3.0-2.5mm pcs. 205 Self-tapping cortical screws. Length 60/30mm, Diam. 3.0-2.5mm pcs. 206 Cortical screw. Length 70/20mm, ¶ 4.5-3mm, shaft 6mm pcs. 207 Cortical screw. Length 70/20mm, ¶ 3.5-3mm, shaft 6mm pcs. 20 1 Testicular prosthesis (28.2ML 35X44mm, 26.4G). Implant filled with highly polymerized silicone, reinforced at the base, which allows the implant to be firmly fixed by placing a suture over it. Additional protective barrier and smooth surface, sterile, individually packaged. pcs 102 Testicular prosthesis S/ A- 31mm x B-23mm/, M(A-37mm xB-23mm) L/A-42x B- 32m. Implant filled with highly polymerized silicone, reinforced at the base, which allows the implant to be firmly fixed by placing a suture over it. Additional protective barrier and smooth surface, sterile, individually packaged. pcs. 10 1 Self-drilling micro screw 4mm - 1.5 pcs. 30 2 Self-drilling micro screw 5mm - 1.5 pcs. 30 3 Self-drilling micro screw 5mm - 2.0 pcs. 354 Self-drilling micro screw 7mm - 1.5 pcs. 305 Self-drilling micro screw 7mm - 2.0 pcs. 206 Self-drilling micro screw 8mm - 2.0 pcs. 157 Self-drilling micro screw (IMF) 8mm - 2.0 pcs. 58 Self-drilling micro screw (IMF) 10mm - 2.0 pcs. 59 Micro plate 4 hole. Straight with span - 2.0 length 26 pcs. 1010 Microplate 4 hole Straight with span - 2.0 length 28 pcs. 1011 Microplate 6 hole Straight with span - 2.0 pcs. 512 Microplate 10 hole bent- 1.5 pcs. 513 Microplate 16 hole Straight gr. 1.0-2.0 pcs. 513 Microplate 16 hole Straight gr. 1.5-2.0 pcs. 514 Microplate 20 hole. Straight - 1.5 pcs. 1515 Microplate T 5 bore - 1.5 pcs. 516 Microplate T 6 bore - 1.5 pcs. 517 Microplate (appendix) 9 bore L-2.0 pcs. 518 Microplate (appendix) 9 bore. P-2.0 pcs. 5 1 Ultra-thin silver vascular patch 14 x 75 mm pcs. 22 Ultra-thin vascular prosthesis 6 x 20 mm, pcs. 23 Ultra-thin vascular prosthesis 8 x 20 mm pcs. 2 1 Sternocostal plate L-180, L-230, L-255, L-280, L-305, L-330, L-355, L-380 pcs. 402 Transverse plate - L-45, L-50, L55 pcs. 30

Opportunity closing date

19 October 2023

Value of contract

to be confirmed