Poland - Structural materials

Description

The subject of this part of the order is a successive delivery of concrete mixes and concrete mortars intended for repairs and construction of roads and pavements in the city of Tarnów. The order includes the following assortment:Concrete C-8/10 Basic order quantity (m3) 1 Maximum order quantity with option right (m3)30Beton C-12/15 Basic order quantity (m3) 300 Maximum order quantity with option right (m3)1000Beton C-16/20 Basic order quantity (m3)35 Maximum order quantity with option right (m3)100Beton C- 20/25 Basic order quantity (m3)1 Maximum order quantity with option right (m3)20Beton C-25/30 Basic order quantity (m3) 1 Maximum order quantity with option right (m3)10Beton C-30/37 Basic order quantity (m3) 1 Maximum order quantity with option right (m3)10Mortar M-10 Basic order quantity (m3)1 Maximum order quantity with option right (m3)10Mortar M-12 Basic order quantity (m3) 1 Maximum order quantity with option right (m3)10Mortar M-15 Basic order quantity (m3) 20 Maximum order quantity with option right (m3)50Mortar M-20 Basic order quantity (m3) 20 Maximum order quantity with option right (m3)50Sand and cement sub-base 1:4 Basic order quantity (m3) 20 Maximum order quantity with option right (m3) 50Stabilization Rm=5.0 MPa Basic order quantity (m3)1500 Maximum order quantity with option right (m3)40003.1.3 Requirements to be met by the offered concrete mixes and concrete mortars:1) Concrete mixes and concrete mortars must be of grade I, free from defects, meet the parameters and technical and operational requirements specified in the ToR and have a Declaration of Performance issued by the manufacturer confirming their compliance with the applicable standards and physical and chemical properties.2) Concrete mixes / mortars must be placed on the market and used for road works in the scope corresponding to the functional properties and intended use, in accordance with the applicable provisions of law, including the Act of 7 July 1994 Construction Law (Journal of Laws of 2018, item 1202), the Act of 16 April 2004 on construction products (Journal of Laws of 2016, Journal of Laws of 2006, item 2592), the Act of 16 April 2004 on construction products, item 1570 as amended) and separate regulations, including the Regulation of the Minister of the Environment of 27.10.2005 on types and conditions of use of products that may be used on public roads, streets and squares (Journal of Laws of 2005 No. 230 item 1960) and meet the requirements of the standard PN-EN 206+A1:2016-12 "Concrete - part 1 Requirements, properties, production and compliance" or equivalent.3) Under the concept of equivalence, the Contracting Authority understands that the offered concrete mixtures and concrete mortars meet the requirements of the said standard in scope: Compressive strength, Density, Frost resistance, Waterproof. Pursuant to Art. 30 (5) of the PZP Act, an Economic Operator who refers to equivalent solutions in an offer is obliged to prove that the offered range of products meets the requirements of the aforementioned standard in the above mentioned scope.4) The Economic Operator whose offer will be assessed the highest will be requested to submit to the Contracting Authority, on the form attached as Appendix No. 6 to the ToR, a statement on the conformity of the offered concrete mixes and mortars with the above mentioned standard or in the scope of the required equivalence.5The remaining description in the ToR The subject of this part of the contract is a successive delivery of vibro-pressed concrete materials for paving work, intended for the construction and repair of roads, pavements and car parks in the city of Tarnów. The order includes the following assortment: 1. trough or triangular2. Garden trough 8x25x333. Openwork slab 40x60 gr 8cm4. Openwork slab 50x50x10 Dunajec type gray5. Paving slab 50x506. Paving slab 35x357. Bet. edges. 8x25x100 grey8. Bet. edges. 8x25x100 color9. Bet. edges. 8x30x100 grey10. Bet. edges. 6x20x100 grey, 11. bet edges. 6x20x100 color12. Road kerbstone 15x25x100 grey13. Road curbstone 15x30x100 grey14. Overrun curb 15x22x100 grey15. Left and right angled kerb16. Curb 20x25x100 grey17. Curved curb 15 cm18 wide. Cube Holland 4 grey19. Holland cube 6 grey20. Holland cube 6 colour21. Cube Holland 8 grey22. Holland cube 8 colour23. Color integration cube24. Behaton cube 6 grey25. Behaton cube 8 grey26. Behaton cube 8 edge grey27. Cube Behaton 8 half grey28. Behaton cube 8 color29. Behaton cube 8 edge colour30. Behaton cubes 8 half color31. Cube Behaton 10 grey32. Cube Nostalit 6 grey33. Cube Nostalit 6 color34. Meander palisade 40 grey35. Meander palisade 60 grey36. Meander palisade 80 gray37. Meander palisade 100 grey38. Meander palisade 120 gray39. Meander palisade 40 colour40. Meander palisade 60 colour41. Meander palisade 80 colour42. Meander palisade 100 color43. Meander palisade 120 color44. Palisade Nostalit 40 gray45. Palisade Nostalit 60 gray46. Palisade Nostalit 80 gray47. Palisade Nostalit 100 grey48. Palisade Nostalit 120 gray49. Palisade Nostalit 40 colour50. Palisade Nostalit 60 colour51. Palisade Nostalit 80 color52. Palisade Nostalit 100 color53. Palisade Nostalit 120 color54. Grey openwork parking cube55. Openwork parking cube colourSpecific order quantities are specified in the ToR. 3.2.3. The requirements to be met by the offered vibropressed concrete materials for paving work1) The vibropressed concrete materials shall not originate from demolition, shall be new, of grade I, free from defects, shall meet the parameters and technical and operational requirements specified in the ToR and shall have appropriate certificates, approvals and a Declaration of Performance issued by the manufacturer confirming their compliance with the applicable standards and physical and chemical properties.2) Vibro-pressed concrete materials must be placed on the market and used for road works within the scope corresponding to the functional properties and intended use, in accordance with the applicable provisions of law, including the Act of 7 July 1994. Construction Law (Journal of Laws of 2018, item 1202), Act of 16 April 2004 on construction products (Journal of Laws of 2016, a) Concrete paving blocks: PN-EN 1338:2005 - Concrete paving blocks - Requirements and test methods or equivalent, b) Kerbs: PN-EN 1340:2004 - Concrete kerbstones or equivalent,c) Concrete paving slabs: PN-EN 1339:2005 - Concrete paving slabs or equivalent,d) Edging: PN-EN 1340:2004 - Concrete kerbstones or equivalent,e) Palisade: PN-EN 1340:2004 - Concrete kerbstones or equivalent.The subject of this part of the contract is the successive delivery of prefabricated concrete elements for road drainage intended for the construction and repair of roads, pavements and car parks in the city of Tarnów. The order includes the following assortment: 1. Circle ø800 joint for mortar H=500, without steps2. Circle ø1000 joint for mortar H=500, without steps3. Circle ø1200 joint for mortar H=500, without steps4. Circle ø1500 joint for mortar H=500, without steps5. Orifice ø 800 mortar joints, steps 6. Orifice ø 1000 for mortar joints, steps7. Orifice ø 1200 mortar joint, steps 8. Orifice ø 1500 mortar joint, steps 9. Well cover ø 800 without opening10. Well cover ø 1000 without hole11. Well cover ø 1200 without hole12. Well cover ø 1500 without opening13. Lifting ring for wells ø50014. Lifting ring for wells ø80015. Lifting ring for wells ø100016. Lifting ring for wells ø120017. Lifting ring for wells ø150018. Lifting ring ring for wells ø80019. Pressure relief ring plate for manholes ø100020. Pressure relief ring plate for manholes ø120021. Pressure relief ring plate for manholes ø150022. Gully ring ø500, H=50023. Gully ring ø500, H=75024. Gully ring ø500, H=100025. Gully base ø500 H=50026. Intermediate plate for the well ø500Specific QUANTITATIVE QUANTITIES REFERRED TO IN SECTION 3.3.3. Requirements to be met by the offered concrete elements for drainage:1) Concrete elements for drainage may not come from demolitions, must be of factory new grade, free from defects, meet the parameters and technical and operational requirements specified in the ToR and have appropriate certificates, technical approvals and the Declaration of Performance issued by the manufacturer confirming their compliance with the applicable standards and physical and chemical properties.2) Concrete elements for drainage must be placed on the market and used for road works to the extent corresponding to the functional properties and purpose, in accordance with the applicable law, including the Act of 7 July 1994. Construction Law (Journal of Laws of 2018, item 1202), the Act of 16 April 2004 on construction products (Journal of Laws of 2016, item 1570, as amended) and separate regulations, including the Regulation of the Minister of the Environment of 27 October 2005 on the types and conditions of use of agents that may be used on public roads, streets and squares (Journal of Laws of 2005, No. 230, item 1960), have the CE mark and meet the requirements of the standard: PN-EN 1917:2004 - Manholes and inspection chambers made of unreinforced concrete, steel fibre reinforced concrete and reinforced concrete or equivalent.3) Under the term of equivalence, the Contracting Authority understands that the offered concrete elements for drainage meet the requirements of the said standard in the scope: Compressive strength, Density, Frost resistance, Waterproof. Pursuant to Art. 30 (5) of the PPL Act, an Economic Operator who refers to equivalent solutions in an offer is obliged to prove that the product range offered by the Economic Operator meets the requirements of the aforementioned standards4 .Other provisions of the ToR The subject of this part of the contract is a successive delivery of plastic elements for drainage intended for the construction and repair of roads, pavements and car parks in the city of Tarnów. The order includes the following assortment:Sewer pipe PP double-walled ø160 SN8Sewage pipe PP double-walled ø200 SN8Sewage pipe PP double-walled ø250 SN8Sewage pipe PP double-walled ø300 SN8Sewage pipe PP double-walled ø400 SN8Sewage pipe PP double-walled ø500 SN8Sewage pipe PP double-walled ø600 SN8Wall sewer pipe PP double-walled ø800 SN8Wall sewer pipe PP double-wall ø1000 SN8Wall sewer pipe lithium ø110 SN4Wall sewer pipe lithium ø160 SN4Wall sewer pipe lithium ø200 SN4Wire lithium ø250 SN4Wall sewer pipe lithium ø300 SN4Special quantities are included in the ToR.3.4.3. Requirements to be met by the offered plastic elements for drainage:1) Plastic elements for drainage shall not come from dismantling, shall be new, of grade I, free from defects, shall meet the parameters and technical and operational requirements specified in the ToR and have appropriate certificates, approvals and declarations of performance issued by the manufacturer confirming their compliance with the applicable standards and physical and chemical properties.2) Plastic elements for drainage must be placed on the market and used for road works in the scope corresponding to their functional properties and intended use, in accordance with the applicable provisions of law, including the Act of 7 July 1994. Construction Law (Journal of Laws of 2018, item 1202), the Act of 16 April 2004 on construction products (Journal of Laws of 2016, item 1570, as amended) and separate regulations, including the Regulation of the Minister of the Environment of 27 October 2005 on types and conditions of use of agents that may be used on public roads, streets and squares (Journal of Laws of 2005, No. 230, item 1960), have the CE mark and meet the requirements of the standard: PN-EN 1852-1:2018-02 - Plastic piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) - Part 1: Specifications of pipes, fittings and system or equivalent.3) The Contracting Authority understands equivalence that the offered plastic elements for drainage meet the requirements of the above mentioned standard: Melt Mass Flow Rate Index, Thermal Stability, Internal Pressure Resistance, Leakage, Material Properties of Sealing Rings, Impact Resistance, Flexibility or Mechanical Strength. Pursuant to art. 30 sec. 5 of the PZP Act, an Economic Operator who refers to equivalent solutions in an offer is obliged to prove that the offered assortment meets the requirements of the aforementioned standards in the above mentioned scope.4) The Economic Operator whose offer will be assessed the highest will be requested to submit to the Contracting Authority a declaration of compliance of the offered plastic elements for drainage with the above mentioned standard or in the scope of the required equivalence in the ToR on the form attached as Annex 6 to the ToR. The subject of this part of the contract is the successive supply of cast iron elements for drainage systems intended for the construction and repair of roads, pavements and car parks in the city of Tarnów. The order includes the following assortment:Cast iron gully D400, H=115 Cast iron gully D400, H=150 cast iron gully D400, ¾ H=115 cast iron gully D400, ¾ H=150R gully D400 cast iron manhole C250 CO 600, H=115 Cast iron well hatch C250 CO 600, H=150 Cast iron well hatch D400 CO 600, H=115 Cast iron well hatch D400 CO 600, H=150Screen of well hatch CO-600 D400D400D400Drainage spacerShort ring of cast iron hatch. 40mm distance ring cast iron manhole height 60mmWater drain curb-road C250, H220Water drain curb-road C250, H250Specific quantities of the order are included in the ToR. 3.5.3 Requirements to be met by cast iron elements for drainage: 1) Cast iron elements for drainage shall not come from dismantling, shall be new, of grade I, free from defects, shall meet the parameters and technical and operational requirements specified in the ToR and have appropriate certificates, approvals and declarations of performance issued by the manufacturer confirming their compliance with the applicable standards and physico-chemical properties.2) Cast iron elements for drainage must be placed on the market and used for road works to the extent corresponding to the functional properties and purpose, in accordance with the applicable provisions of law, including the Act of 7 July 1994. Construction Law (Journal of Laws of 2018, item 1202), the Act of 16 April 2004 on construction products (Journal of Laws of 2016, item 1570, as amended) and separate regulations, including the Regulation of the Minister of the Environment of 27 October 2005 on types and conditions of use of agents that may be used on public roads, streets and squares (Journal of Laws of 2005, No. 230, item 1960), have the CE mark and meet the requirements of the standard: PN-EN 124-2:2015-07 Gully and manhole tops for pedestrian and road traffic surfaces - Part 2: Gully and manhole tops made of cast iron or equivalent.3) The Contracting Authority understands equivalence that the offered cast iron elements for drainage meet the requirements of the said standard in the scope: View, Load capacity, slip resistance, Clearance, Depth of deposition, Grate slot dimensions, Water flow surface, Determination of position of grilles and covers, Body bearing surface, Body depth. Pursuant to Art. 30 (5) of the PZP Act, an Economic Operator who refers to equivalent solutions in an offer is obliged to prove that the offered assortment meets the requirements of the aforementioned standards in the above mentioned scope.4) The Economic Operator whose offer will be assessed the highest will be requested to submit to the Contracting Authority a declaration of conformity of the offered cast iron elements for drainage with the above mentioned standard or within the required equivalence in the ToR.

Opportunity closing date

25 February 2019

Value of contract

£100k-1m