Poland - Solar installations

Description

a) Delivery of complete solar sets (consisting of elements indicated in Annex 1a to the ToR - Detailed description of the subject matter of the order - Part No. 1 - Delivery together with installation of solar collector systems), including in particular: Solar sets comprising 2 solar collectors with a total output of min. 3.26 kW and a storage tank with min. 200 l - 165 pcs., including 161 pcs. mounted on residential buildings,Solar sets comprising 3 solar collectors of total power min. 4.89 kW and a storage tank with min. 300 l - 184 pcs., including 179 pcs. mounted on residential buildings,Solar sets comprising 4 solar collectors with total power min. 6.52 kW and a storage tank with min. 400 l - 15 pcs, including 15 units mounted on residential buildings, b) Execution of planned installation and assembly works, c) Execution of reconstruction works, i.e. finishing of the installation passages in accordance with their original condition, protection of the installation sites against weather conditions, as well as possible restoration to the original condition of any damaged surfaces, structural elements and other elements damaged or damaged as a result of the installation and assembly works carried out, d) Training of users in the principles of proper operation of the solar installation, including all devices included in the set, together with the provision of detailed operating instructions, technical and operating documentation and the installation scheme. a) Delivery of complete sets of photovoltaic installations consisting of elements indicated in Annex 1b to the ToR - Detailed description of the subject matter of the order - Part 2 - Delivery together with assembly of photovoltaic installations), including in particular: Photovoltaic sets covering 10 panels of total power min. 3,00 kWp and single-phase inverter - 112 units, including 97 units mounted on residential buildings,Photovoltaic sets comprising 14 panels of total power min. 4,20 kWp and three-phase inverter - 129 units, including 113 units mounted on residential buildings,Photovoltaic sets comprising 18 panels of total power min. 5,40 kWp and three-phase inverter - 105 pcs., including 92 pcs. mounted on residential buildings,Photovoltaic sets comprising 24 panels of total power min. 7.20 kWp and three-phase inverter - 33 pcs., including 24 pcs. mounted on residential buildings,Photovoltaic sets comprising 28 panels of total power min. 8.40 kWp and three-phase inverter - 17 pcs, including 13 units mounted on residential buildings, b) Execution of planned installation and assembly works, c) Execution of reconstruction works, i.e. finishing in accordance with the original state of the installation passages, protection of the installation sites against weather conditions, as well as possible restoration to the original state of any damaged surfaces, structural elements and other elements damaged or damaged as a result of the installation and assembly works carried out, d) Training of users in the principles of proper operation of the photovoltaic installation, including the provision of detailed operating instructions and wiring diagram, e) Development by an authorized person of complete documentation for the purpose of reporting the installation to a selected supplier of electricity. Within the scope of Part No. 3, the Economic Operator shall deliver and install a total of 47 biomass boilers for central heating and domestic hot water preparation, including in particular: a) Delivery of biomass boilers (consisting of the elements indicated in Annex 1c to the ToR - Detailed description of the subject of the order - Part No. 3 - Delivery together with installation of biomass boilers), including in particular: Biomass boilers with a capacity of min. 10 kW - 3 pcs.,Biomass boilers with min. output 15 kW - 19 pcs.,Biomass boilers with min. output 20 kW - 20 pcs.,Biomass boilers with min. output 25 kW - 4 pcs.,Biomass boilers with min. output 30 kW - 1 pc.,b) Execution of planned installation and assembly works,c) Restoring to the original state any damaged surfaces, structural elements and other elements damaged or damaged as a result of the installation and assembly works,d) Training of users in the rules of proper operation of the installed boiler and providing detailed operating instructions. a) Delivery of complete heat pump sets (consisting of elements indicated in Annex 1d to the ToR - Detailed description of the subject matter of the order - Part No. 4 - Delivery together with installation of heat pumps), including in particular: Set including a heat pump for domestic hot water with a minimum power of 1.5 MW, a) Delivery of complete heat pump sets (consisting of elements indicated in Annex 1d to the ToR - Detailed description of the subject of the order - Part No. 4 - Delivery together with installation of heat pumps), including in particular: Set including a heat pump for domestic hot water with a minimum power of 2.5 MW, a) Delivery of complete heat pump sets (consisting of elements indicated in Annex 1d to the ToR - Detailed description of the subject of the order - Part No. 4 - Delivery together with installation of heat pumps). 3 kW and a storage tank with min. 300 l - 15 pcs.,Set consisting of a heat pump for domestic hot water and domestic hot water of min. power 5 kW and a storage tank of capacity 300 l - 1 pcs.,Set consisting of a heat pump for domestic hot water and domestic hot water of min. power 7 kW and a storage tank of capacity 300 l - 9 pcs.,Set consisting of a heat pump for domestic hot water and domestic hot water of min. power 1 pcs. 9 kW and 300 l - 16 tank capacity, Set of heat pumps for domestic hot water and domestic hot water with min. 12 kW and a 300 l - 21 tank capacity, b) Execution of planned installation and assembly works, c) Execution of reconstruction works, i.e. finishing in accordance with the original state of the area around the system passages, as well as possible restoration to the original state of any damaged surfaces, structural elements and other elements damaged or damaged as a result of the installation and assembly works, d) Training of users in the principles of proper operation of the installed heat pump, including the provision of detailed operating instructions. At the same time, the Ordering Party indicates that the above mentioned quantities and capacities of individual RES installations are used for estimating and comparing offers, however, they may differ from the actual implementation.

Opportunity closing date

09 December 2019

Value of contract

to be confirmed