United States - Remanufacture of the F100-PW-220/-220E/-229 Carbon Seals

Description

Added: Apr 26, 2019 3:21 pm

Synopsis for FA8121-19-R-0019

AFSC/PZAAA, 3001 STAFF DR, STE 1AE1/98C, TINKER AFB, OK 73145-3032
Remanufacture of the F100-PW-220/-220E/-229 Carbon Seals
1. Estimated issue date: 13 May 2019
Estimated closing/response date: 12 June 2019

2. PR#: FD2030-19-00011 (USAF) and FD2030-18-34081 (FMS)

3. This is a remanufacturing requirement and will be a Requirements contract with a one (1)-year base and four (4), one (1)-year options.
4. RMC - R1C
5. NSN and Output Part Number(s): (see below) The NSN and part numbers listed below are also applicable to all of the subsequent option years.

USAF
CLIN 0001 - #1 Carbon Seal, NSN: 2840-00-352-2148NZ P/N: 4031515 (IC), 4031516, 4031517
CLIN 0002-- #2 Carbon Seal (rear), NSN: 2840-00-343-7692NZ P/N: 4033286 (IC), 4033283, 4033284
CLIN 0003-- #2 Carbon Seal (front), NSN 2840-01-282-4202NZ P/N: 4074010 (IC), 4072837, 4072839
CLIN 0004-- #3 Carbon Seal (rear), NSN 2840-00-570-0752NZ P/N: 4036995, 4036993, 4036994
CLIN 0005--#3 Carbon Seal (front), NSN: 2840-00-343-7601NZ P/N: 4018381 (IC), 4012468, 4012501
CLIN 0006--#4 Carbon Seal, NSN: 2840-00-390-1162NZ and 2840-01-386-9284NZ P/N: 4035886 (IC), 4035883, 4035882
CLIN 0007--#5 Carbon Seal, NSN 2840-00-340-7343NZ P/N: 4018382 (IC), 4014756, 4014757
FMS
CLIN 0009 - #1 Carbon Seal, NSN: 2840-00-352-2148NZ P/N: 4031515, 4031516, 4031517
CLIN 0010-- #2 Carbon Seal, NSN: 2840-00-343-7692NZ P/N: 4033286, 4033283, 4033284
CLIN 0011-- #2 Carbon Seal, NSN 2840-01-282-4202NZ P/N: 4074010, 4072837, 4072839
CLIN 0012-- #3 Carbon Seal, NSN 2840-00-570-0752NZ P/N: 4036995, 4036993, 4036994
CLIN 0013--#3 Carbon Seal, NSN: 2840-00-343-7601NZ P/N: 4018381, 4012468, 4012501
CLIN 0014--#4 Carbon Seal, NSN: 2840-00-390-1162NZ P/N: 4035886, 4035883, 4035882
CLIN 0015--#5 Carbon Seal, NSN 2840-00-340-7343NZ P/N: 4018382, 4014756, 4014757

6. Part Number(s): (see number 5 above)
7. Description: CLIN 0001: fit on the F100-220/220E engine inlet fan case bearing housing; CLIN 0002: #2 bearing face seal maintains the seal to contain the oil in the #2 and #3 bearing compartment of the core module rear compressor; CLIN 0003: maintains the seal to contain the oil in the compartment; CLIN 0004: a component part of #3 bearing rear seal assembly and support core module rear compressor; CLIN 0005: #3 bearing front face seal maintains the seal to contain the oil in the bearing compartment of core module rear compressor; CLIN 0006: carbon face seal maintains the seal to contain the oil in the #4 bearing area of the core module rear compressor rear hub; CLIN 0007: creates a seal containing that contains the engine oil for supply to the #5 bearing in the Fan Drive Turbine Module
8. Quantity/Delivery: (Best Estimated Quantity and delivery are below)
USAF
CLIN 0001 - Basic: 60 ea, Option I: 60 ea, Option II: 60 ea, Option III: 60 ea, Option IV: 60 ea, Delivery: 11 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0002 -Basic: 60 ea, Option I: 60 ea, Option II: 60 ea, Option III: 60 ea, Option IV: 60 ea, Delivery: 8 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0003 - Basic: 40 ea, Option I: 40 ea, Option II: 40 ea, Option III: 40 ea, Option IV: 40 ea, Delivery: 15 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0004 - Basic: 75 ea, Option I: 75 ea, Option II: 75 ea, Option III: 75 ea, Option IV: 75 ea, Delivery: 10 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0005 - Basic: 45 ea, Option I: 45 ea, Option II: 45 ea, Option III: 45 ea, Option IV: 45 ea, Delivery: 8 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0006 - Basic: 170 ea, Option I: 170 ea, Option II: 170 ea, Option III: 170 ea, Option IV: 170 ea, Delivery: 17 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0007 - Basic: 45 ea, Option I: 45 ea, Option II: 45 ea, Option III: 45 ea, Option IV: 45 ea, Delivery: 8 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0008 - Data not separately priced
FMS
CLIN 0009 - Basic: 5 ea, Option I: 5 ea, Option II: 5 ea, Option III: 5 ea, Option IV: 5 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0010 - Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0011 - Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0012 - Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0013 - Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0014 -Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0015 - Basic: 2 ea, Option I: 2 ea, Option II: 2 ea, Option III: 2 ea, Option IV: 2 ea, Delivery: 1 ea/month starting 30 days after receipt of order and will continue at that rate until contract is complete
CLIN 0016 - Data not separately priced
9. Application: F100 Engine - remanufacture of the F100-220/229 Carbon Seals
10. Destination: Tinker AFB OK-USAF; To Be Determined-FMS
11. Export Control: Yes

12. UID: If unit price exceeds $5,000 then UID requirements will apply.
13. Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards
14. Additional Information:
10 U.S.C. 2304 (c) (1), Justification: Supplies (or services) required are available from one or only a limited number of source(s) and no other type of supplies or services will satisfy agency requirements. All responsible sources may submit a capability statement, proposal or quotation, which shall be considered by the agency. Intended source is PAS Technologies.

Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
The Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice

Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.fedbizopps.gov.
15. This is NOT a small business set-aside.

16. Buyer Name, Phone Number and E-mail Address: Nicole Myers, 405-739-4340, nicole.myers.1@us.af.mil.

Opportunity closing date

13 May 2019

Value of contract

to be confirmed