Germany - Prefabricated buildings

Description

The University of the Federal Armed Forces Munich (UniBw M) intends to procure a mobile structure (MB) for a converter station for MVDC networks as a prototype for scientific purposes within the scope of the DEFINE project. The subject of the contract is the planning, manufacture, delivery and assembly of a MB for a converter station for MVDC networks as a prototype for scientific purposes.
The subject of the contract is the planning, manufacture, delivery and assembly of a mobile structure (MB) for a converter station for MVDC networks as a prototype for scientific purposes for the DEFINE project.With the DEFINE project, UniBw M intends to develop a suitable IT and control structure and power electronic converters that meet the demanding future requirements for maximum safety and reliability in DC networks. These requirements include both uninterruptible power supply in case of faults in the grid, for example short circuits, and protection against cyber attacks on this critical supply infrastructure.The MB has the approximate external dimensions of 13.00 m (length); 2.50 m (width) and 2.75 m (height). Actual dimensions will result from the Contractor's (CO) performance of services. The MB serves as a scientific prototype as well as a laboratory for scientific investigations and is not intended to be entered by visitors. The MB will be installed above ground. The MB shall be equipped by the Contractor with ventilation systems, heat supply systems, process cooling systems, telecommunications and information technology systems as well as with electrical systems in accordance with the present performance specification with performance program. The installation of heavy current systems by the Contractor is not planned. The MB shall be manufactured entirely in the factory as a delivery service and subsequently installed on the premises of the University of the Federal Armed Forces Munich (UniBw M).The Contractor shall essentially provide the following services:1. Planning - initial discussion with the Client (CL) prior to commencement of the planning services (including object planning of buildings and interiors in accordance with HOAI 2021, work phases 3 and 5, 8 and 9- specialist planning of structural engineering in accordance with HOAI 2021, work phase 3 and 5- specialist planning of technical equipment in accordance with HOAI 2021, work phase 3, 5, 8 and 9- Planning of a rail system- Creation of a Building Information Model after production of the MB (LOD 500)- Continuous coordination of the planning results with the client- Commissioning of an external test engineer to check the proofs of stability (work phase 5) as well as the execution plans in terms of structural analysis in accordance with PrüfVBau- Subsoil investigations as required2. Construction site, earthworksThe installation site for the MB is located on the premises of the UniBw M.The Contractor shall carry out the necessary preparatory work for the foundation of the MB in good time before delivery of the MB to the installation site. For this purpose, the topsoil shall be removed at certain points and a layer of load-bearing, water-permeable and frost-resistant soil material shall be produced. The type of soil material as well as the extent and depth of the area for soil replacement shall be based on the results of the Contractor's planning services. Necessary planning and surveying services for the aforementioned work shall be provided by the Contractor. Uncontaminated and contaminated excavated material shall remain the property of the Client and shall be temporarily stored by the Contractor immediately adjacent to the installation site of the MB.At the planned installation site of the MB, soil replacement work has already been carried out within the scope of a previous use and stone slabs have been laid in some areas. The Contractor is free to take over ownership of this existing material and to continue to use it. The Contractor shall obtain information about the local conditions before submitting a bid and during a site inspection. Before carrying out excavation work, the Contractor shall obtain information from the Client regarding any divisions laid in the construction area. During all work, the trees and plants present in the construction area shall be protected by the Contractor in accordance with DIN 18920.3. Production of the MBProduction of the MB taking into account the planning results of the Contractor, the coordination results with the Client and the inspection notes of the inspection engineer commissioned by the Contractor. During production, all requirements (performance program) of this invitation to tender shall be observed. The MB shall be manufactured at the Contractor's works. Exceptions to this will be described separately.4. Delivery and erection of the MBDelivery of the MB to the erection site on the premises of the UniBw M. Erection of the MB on the subsoil prepared by the Contractor using a mobile crane. The Contractor shall apply for the necessary transport permits; the costs shall be borne by the Contractor. The date of delivery and installation shall be agreed with the Client at least 4 weeks in advance. Details are given in the specifications.

Opportunity closing date

24 October 2023

Value of contract

to be confirmed