Poland - Orthopaedic implants

Description

The subject of the order is the purchase and delivery, together with unloading, of orthopaedic materials necessary to perform medical services in the Trauma and Orthopaedic Surgery Department of the John Paul II Specialist Medical Centre S.A. Detailed description of the subject of the order is included in Appendix 1 to the ToR.
"Sterile set for arthroscopy with a bag.Composition of the set:- 1 x serviette for a tool table 152x190 cm, with absorbent reinforcement in the central part (set wrapping)- 1 x serviette for a Mayo 80x145 cm- 1 x serviette for a Mayo 80x145 cm- 1 x serviette 135x196 cm- 1 x stokinet 23x91 cm 2-layer, flexible, non-slip - 2 x adhesive tape, 10x50 cm- 2 x absorptive towel 34x36 cm with a microgrid to protect against entertainment - 1 x arthroscopy napkin 221/290x310 cm with table arm cover, with flexible opening Ø 6 cm, with absorbent reinforcement min. 74x90cm around the opening, with three integrated Velcro-type cable organizers, with an integrated fluid bag with filter and suction port with a stopper, with vertical and horizontal stiffeners to form and maintain the shape of the bag and with protection to prevent the serviette or operator's clothing from tearing at the ends of the bag's stiffeners. The serviette is made of multilayer polypropylene SMS-type non-woven fabric with a weight of 43g/m2, in the critical zone with absorbent reinforcement of laminate with a total weight of at least 115 g/m2, well laid out on the patient, in the non-critical part "breathable", vapour-permeable. The kit complies with EN 13795 and is sterilized in a transparent foil bag with sterilization ports. It has 4 self-adhesive labels for medical records including: catalogue number, flight number, expiry date and manufacturer's name, including 2 labels with additional EAN code. EO sterilization. Sets packed collectively in a plastic bag, then a cardboard box. The manufacturer meets the requirements of the ISO 14001 environmental standard confirmed by a certificate." pcs. 100" Sterile set for limb surgery - knee replacement.Composition of the set:- 1 x serviette for a tool table 140 x 190 cm, made of PE foil (set wrapping)- 1 x serviette for a Mayo table 80 x 145 cm- 1 x serviette 145 x193 cm, full-size - 1 x stokinet 23x122 cm, 2-layer, flexible, non-slip - 3 x adhesive tape 9 x 50 cm- 1 x serviette for limb operations 221 x 326 cm with flexible opening Ø 6 cm, with reinforcement 77 x 114 cm, equipped with 6 double cable organizers. Patient covering serviettes made of absorbent laminate, three-layer, max. 66 g/m2, free of dusty and flammable cellulose and viscose fibers - dust ratio≤1.9 log10, high resistance to fluid penetration > 200 cm H2O. Critical area reinforced (total weight 140g/m2) with high fluid permeation resistance > 200 cm H2O and wet/dry tear resistance >570kPa. First flammability class. The set complies with PN-EN 13795 standard, sterilized in a transparent foil bag with sterilization ports, has 4 self-adhesive labels for medical documentation containing: catalogue number, flight number, expiry date, manufacturer's name, including 2 labels with additional EAN code. EO sterilization. Sets packed collectively in a plastic bag, then a cardboard box. The manufacturer meets the requirements of the ISO 14001 environmental standard confirmed by a certificate." pcs. 200" Sterile set for limb operations other limb operations.Composition of the set:- 1 x serviette for a tool table 152x190 cm with microtexture with polypropylene reinforcement in the middle part (set wrapping)- 1 x serviette for a Mayo 80x145 cm- 1 x serviette for a Mayo 80x145 cm- 1 x serviette 135x196 cm, non-adhesive- 1 x stokineta 23x91 cm 2-layer, flexible, non-slip - 2 x adhesive tape 10x50 cm- 1 x serviette for limb surgery 221x328 cm with flexible hole Ø 6 cm, with absorbent reinforcement 67x140 cm around the hole, with four holders for Velcro-type wires made of multilayer, "breathable" - vapour-permeable polypropylene non-woven fabric type SMS with max. weight. 43g/m2, in the critical zone with absorbent reinforcement made of laminate, with a total weight of min.115 g/m2, Detailed description of the subject of the order is included in Appendix 1 to the ToR. Nail for stabilizing heel bone fractures with the possibility of multi-directional blocking. Nail with a length of 65 mm and diameter of 8 mm, left, right. The nail has 7 holes for locking screws. Two holes for fixing screws to allow the ankle support of the heel bone to be combined. With x-ray sight. The set includes: flat head locking screws with a diameter of 3.5 mm and a length of 22-70 mm placed on a tripod, plugs 0, 5, 10, 15, 20 mm. Nail in the version of implant steel pcs. 40Selftapping, self-tapping screws, reinforced with a flat head Ø 3.5mm, length from 20mm - 50mm with a pitch of 2mm. From 55mm - 70mm with 5mm pitch. pcs 280 Blanking plug from 0mm to 20mm with 5mm pitch. pcs 40 Liquid bone replacement material with feeder. Bone substitute consisting of bio-removable, low-temperature, non-toxic and odourless bone cement, fully resorable, with composition: 60 % hydroxyapatite, 40 % calcium sulphate and a set of mixers and feeders, intended to fill bone cavities. Maximum temperature during moulding not more than 40oC. The compression strength should be similar to that of spongy bone (i.e. approximately 5-8 MPa). The setting time should not exceed 20-25 minutes. Volumes, 5 ml, 10 ml, 18 ml. Possibility of choosing a substitute with an antibiotic (genamecin or vancomycin).1 Bio-reducible cement - capacity 5 ml pieces 152 Bio-reducible cement - capacity 10 ml pieces 153 Bio-reducible cement - capacity 18 ml pieces 154 Bio-reducible cement - capacity 10 ml with antibiotic G/V pieces 155 Needles for different length and thicknesses pieces 60 TREE STRUCTURE MEMBRANE for CROSTRUCTION-The diaphragm is made up of three layers of 6 mm thick interconnected layers. The top layer consists of 100 % Type I collagen, the middle layer consists of 60 % Type II collagen and 40 % HA and Mg, the bottom layer consists of 30 % Type II collagen and 70 % HA and Mg.1. Ø = 12 mm, h = 6 mm pcs. 202 Ø = 15 mm, h = 6 mm pcs. 203 Ø = 18 mm, h = 6 mm pcs. 204 20 mm x 30 mm x 6 mm pcs. 205 30 mm x 40 mm x 6 mm pcs. 20 TWO-layer MEMBRANE for CHRANGIBLE-COSTRUCTION IN KNEEL PACKAGE AND JOINT PACKAGE. The membrane consists of two layers of 4 mm thick interconnected layers. The top layer consists of 100 % Type I collagen, the bottom layer consists of 60 % Type II collagen and 40 % HA and Mg6 Ø = 12 mm, h = 4 mm pcs 207 Ø = 15 mm, h = 4 mm pcs 208 Ø = 18 mm, h = 4 mm pcs. 209 20 mm x 30 mm x 4 mm pcs. 2010 30 mm x 40 mm x 4 mm pcs. 20 TWO-layer MEMBRANE for the reconstruction of the CHRISTIAL STRUCTURE PACKAGE IN THE KNEEL PACKAGE PACKAGE The membrane consists of two 2 mm thick layers. The top layer consists of 100% type I collagen and the bottom layer consists of 60% type II collagen and 40% HA and Mg11 Ø = 12 mm, h = 2 mm pcs 2012 Ø = 15 mm, h = 2 mm pcs 2013 Ø = 18 mm, h = 2 mm pcs 2014 20 mm x 3 mm x 2 mm pcs 2015 30 mm x 40 mm x 2 mm pcs 20Stimulan - dihydrate pure calcium sulphate (CaSO4.2H2O) for use in soft tissue, bone and marrow infections. Available as paste or granules in various sizes: 3mm, 4.8mm, 6mm. Stimulan can be mixed with most antibiotics. Antibiotics are released in a controlled way during 21-40 days at a dose more than 1000 times higher than the therapeutic dose. Stimulan granules or paste are a substitute for bone grafts, which is completely resorbed and replaced by bone during the healing process. Biodegradable and biocompatible.16 Pack 5 cc pcs 2017 Pack 10 cc 2018 Pack 20 cc 2018 Pack 20 cc pcs 20SYNTHETIC SKIN CHANGER - Wound Treatment. The dressing cleans the wound and at the same time maintains a moist environment that optimally conditions the wound for subsequent skin grafts. The product is made of a two-layer synthetic material and does not contain any additives. The upper surface consists of a thin, microporous film that is air and moisture permeable. This prevents the accumulation of secretions, while protecting the wound from external bacterial infections and contamination. The bottom layer forms a working matrix made of flexible, soft polyurethane. The wound exudate adheres to a fine porous structure and is removed together with the necrotic tissue after a bandage change. Fibroblasts and vessels begin to grow in the wound area and open polyurethane foam during the mechanical wound cleaning phase.19 8 x 5 cm, 1 op. = 10 pcs. 2020 8 x 10 cm, 1 op. = 10 pcs. 2021 8 x 23 cm, 1 op. = 10 pcs. 2022 12 x 30 cm, 1 op. = 10 pcs. 2023 12 x 45 cm, 1 op. = 10 pcs. 20 1 Cement-free titanium baffle pin, straight, wedge-shaped, sprayed only in the proximal part with Plasma Spray titanium cladding, in at least 10 sizes in the standard and High Offset versions. Cervical and cervical angle 138 degrees, cone 12/14. pcs 4002 Cement-free press-fit socket made of titanium alloy, covered with a titanium porous lining sprayed under vacuum and additionally with a layer of hydroxyapatite, two insert locking mechanisms. Pan liners made of high-cross-linked standard and asymmetric polyethylene. It is also possible to use a ceramic insert, semi-bonded and dual-mobile... The socket enables additional stabilization with screws, with holes for screws blinded in the factory. Pocket in the size of the outer diameter from a minimum of 46mm to a minimum of 70mm with a stroke of 2mm. pcs 2003 high-cross-linked polyethylene inserts, symmetrical, asymmetrical on the head growing 28.32.36mm pcs 1004 high-cross-linked polyethylene inserts stabilized with vit. E1, symmetrical, asymmetrical for heads growing 28,32,36mm pcs 505 ceramic insert for heads growing 28,32,36mm pcs 506 inserts of vit. stabilized high cross-linked polyethylene. E1 for semi-customized dentures pcs 507 metal insert CoCr for pan for Dual Mobility pcs 508 high cross-linked polyethylene inserts stabilized with vit. E1, Dual Mobility pcs 509 metal heads CoCr 28,32mm pcs 10010 metal heads CoCr 36mm pcs 10011 ceramic head Biolox Delta pcs 5012 titanium pan press-fit. The surface of the acetabulum is rough, porous, covered with regular highlights to facilitate initial fixation and subsequent osteointegration. The acetabulum is available with and without screw holes. Titanium plugs for unused screw holes are available. Pan sizes 42-68 mm. pcs 20013 high-cross-linked polyethylene inserts, symmetrical, asymmetrical for growing heads 28.32.36mm pcs 20014 metal heads CoCr 28.32mm pcs 5015 metal heads CoCr 36mm pcs 10016 ceramic head Biolox Delta pcs 50Modular inspection plunger consisting of a turning and distal part. Made of titanium alloy. Both parts are joined together by means of CoCr.17 alloy conus. Swivel part in two types (standard and wide) from 55mm to 105mm in length with 10mm stroke - equipped with a hole on the medial side with the possibility of ante/retrotorsion adjustment within +/- 40 degrees. pcs 2018 Distal part (mandrel) in two versions - straight and curved, in thicknesses from 14 to 28mm (with a stroke of 2mm) and lengths 120, 140, 200 and 260mm pcs 2019 "Monoblock inspection mandrel, designed for inspection of hip joint endoprosthesis in cement-free version. Titanium endoprosthesis mandrel, Wagner type, monoblock. Available in lengths 190cm, 225cm, 265cm, 305cm and diameters from 14 to 25mm with a stroke every millimetre". pcs 2020 metal heads CoCr 28.32, 36mm pcs 4021 Press-fit cementless inspection pan made of titanium alloy in 3D printing technology, covered with titanium porous lining sprayed with vacuum and additionally hydroxyapatite layer. The pan enables additional stabilization with screws, with holes for screws blinded in the factory. Pan inserts symmetrical, asymmetrical, semi-bonded on heads growing 28.32.36mm, in sizes from a minimum of 46mm to a minimum of 70mm in external diameter with a stroke of 2mm. pcs 40 Bipolar endoprosthesis of the head of the radial bone, cement. Pins made of cobalt, bipolar heads supplied as a single element without additional connecting elements.1 Cement pin pcs 502 Reconstructive angled head, cement pcs 503 Bipolar head made of PEEK plastic covered with a layer of cobalt pcs 50 1 Sewing set for meniscus all-inside technique. The system consists of two PEEK implants, connected by a polyethylene, non-absorbent, reinforced seam 2-0. The seam has a self-clamping knot to reduce the distance between the implants. The implants are loaded in rows into a single, semi-open, disposable needle. The graduated needle has an adjustable stop to protect it from being driven too deep into the meniscus. The implants are pushed out of the needle outside the joint cavity with a ring trigger on the handle with a simultaneous sound signal. The kit includes a disposable, semi-open metal cannula for inserting the system into the joint. pcs 1002 Dedicated sterile implant kit, for arthroscopic reconstruction of the meniscus root, using the single or double channel technique including: - 2 mm drill bit with anti-rotation wings - two casings of 2.8 mm per drill bit, with laser markers along the entire length, 180o apart - two threads, reinforced, braided #2, 38" long - non-absorbable monofilament thread - plate with 4 holes 4 x 12 mm pcs 303 Disposable cannulas rigid and flexible, screwed, with a twist along the entire length of the cannula, fitted with a valve and with a thread holding system, with sizes from 4.5 mm to 8.5 mm and lengths from 90 mm to 45 mm, for shoulder arthroscopy pcs 50Extrusion ACL femoral mount4 Longitudinal plate with four holes and made of titanium alloy to suspend the graft in the femoral canal. The plate is required to be permanently bonded to a fixed or adjustable, high strength braided polyester loop (no knot). Loop length from 10 - 60 mm. Loop pitch every 5 mm. The implant should contain two factory-made threads #2 and #5 for dragging and turning the implant in the femoral canal. Alternatively, delivery is required: - a plate permanently bonded to the double loop in the size of 15-60 mm pitch every 5 mm to the ligament of the patella, - an elongated endobutton which is an endobutton cap for revision procedures. pcs 1005 cannulated drill bit for endobatton canal pcs 36 drilling wire with 2.4 mm mesh pcs 37 directional wire for interference screws pcs 5AcL Reconstruction ACL tibial fixture8 interference screw made of PEEK material with diameters from 6 mm to 12 mm and lengths 20-25-30-35 pcs 100Sewing9 Disposable instrument for threading and manipulation of sutures during arthroscopic procedures, with 45st angle of bend. right; 45st. left; 45st. up; 70st. hooked and straight with 2 polypropylene threads pcs 1 1 Intramedullary nail for stabilisation of fractures closer to the humerus crest. Titanium nail, anatomical (right, left), straight, long and short versions, titanium, solid, in the proximal part four holes for locking screws (threaded) to stabilize the fractures of the nodule larger, smaller, head mass, to prevent displacement of fragments. In the proximal part a polyethylene insert (PEEK) to prevent the locking screws from loosening. Short version fully covered with a sight. Sizes: 150,220,250,280mm, Closer part diameter 10mm,further 8 (150mm) and 7mm(others) cpl. 302 nail pcs. 13 locking screw pcs. 24 closing screw pcs. 25 fastening screw pcs. 16 Intraspin nail to stabilize fractures of the humerus shank. Titanium nail, solid, with an asymmetrical end, inserted by the shoulder head, with a 4 degree shank bend. Compressible. Further on, locking holes in two planes (AP and arrowhead) . Sizes: diameter 7 and 8 mm long. 180,200,220,240,260,280,300mm. cpl 207 nail pcs 18 locking screw pcs 29 closing screw pcs 210 fastening screw pcs 111 Reconstructive mid-socket nail for stabilizing proximal and multilevel tibial fractures .Titanium nail in long version (for multilevel fractures)- cannulated and short version (for proximal fractures)- solid and cannulated, in the proximal part triple - anatomically stable lock (threaded screw holes), screws supporting the "plateau" of the tibia led divergently at 70 degrees. Dynamic hole for compression of shrapnel. In the short version, in the further part two static locking holes, in the further part of the long version - three static holes (two in the front plane and one in the arrow plane). The short version of the nail is 200mm long and has diameters of 8.9 and 10mm - completely covered with a sight. Long version with dimensions from 240 to 420 mm and diameters of 8,9 and 10 mm - further on, locked "free hand". Extensions 5 and 10 mm for deeper nail placement. cpl. 4012 nail pcs 113 locking screw pcs 314 compression screw pcs 115 plug pcs 116 threaded sleeve pcs 1 Conector reducers system for hip joint inspection operations1 Cone reducers for intraoperative neck length correction up to 21 mm, anti-version up to 14o and CCD angle up to 14o. The reducers are adapted to any cone type. Standard reducers for 12/14 and 14/16 cones are available. pcs 202 Cone reducers allowing intraoperative neck length correction up to 21mm, anti-version up to 14o and CCD angle up to 14o. Non-standard reducers e.g. V40 cones pcs 103 CoCr metal heads with diameters of 28mm, 32mm and 36mm adapted for cone reducers pcs 204 BioloxDelta ceramic heads with diameters of 28mm, 32mm and 36mm adapted to the cone reducers pcs 10Traninity shell - dual mobility system5 Pan liners made of highly polished cobalt chrome alloy adapted to double-mobile articulation (Dual Mobility) available for shells from 48mm size. pcs 206 Large Dual Mobility heads for metal inserts. Heads made of strongly cross-linked polyethylene HXLPE protected against oxidation with vitamin E. pcs 20 1 Soft universal needle-needle anchor, made of polyester braided line, on sterile feeder. Diameter 1.4mm, short feeder. 1op 10pcs opk 302 Reusable guide bar short 1.4mm pcs. 13 short drill bit 1.4 mm pcs. 14 Soft universal anchor with cutting needles, made of polyester braided line, on sterile feeder. Diameter 2.9mm.Two different colored, reinforced threads. Short feeder. 1op 10pcs opk. 305 Reusable short guide bar 2.9mm pcs. 16 short drill bit 2.9 mm pcs. 17 Reusable punch short 2.9 mm pcs. 18 PEEK anchor, driven - with titanium blade, no drilling required, knotless, with the possibility of inserting and independent tension of 8 threads, diameter 4.5mm, length 25.8mm, rotary head in applicator to control thread tension. op. 309 "Knotless tibial ligament repair system consisting of: 1. a button made of stainless steel or titanium with a diameter of 6.35mm2. A sharp-ended titanium plate on one side, combined with a self-clamping, knotless and adjustable polyethylene loop. Plate with a protruding ring to limit its displacement relative to the channel. Implant guide thread included. " op. 3010 cannula drill 3.2 mm pcs. 5Implants for sewing a meniscus11 Two soft, polyester implants for sewing a meniscus, connected with 2-0 thread with UHMWPE. Knotless system, ziploop fastening. Pencil feeder with needle penetration depth limiter 10-18mm. Metal guide bent 14st, ended with needle 1.6mm diameter. 10012 Metal half pipe guide pcs. 113 Thread cutter pcs. 1Implant arthroscopic for use in knee treatment14 Reconstruction ACL: femoral fixation - Endobutton-type implant: sharply ended 13mm titanium plate combined with self-clamping, adjustable and knotless polyethylene loop. Plate with a protruding ring to limit its displacement relative to the femoral canal. Leaning of the graft face against the ceiling of the femoral canal. The implant guiding thread is included. pcs. 5015 Reconstruction ACL: femoral fixation version BTB- Endobutton-type implant: sharply ended 13mm titanium plate combined with self-clamping, adjustable and knotless polyethylene loop, additional knotless loop for bone block. Plate with a protruding ring to limit its displacement relative to the femoral canal. Leaning of the transplant face against the ceiling of the femoral canal. The implant guiding thread is included. pcs. 2016 "Reconstruction of ACL: femoral lengthened implantImplant type endobutton: sharply ended, elongated - 20mm, titanium plate combined with a self-clamping, adjustable and knotless polyethylene loop. Plate with a protruding ring to limit its displacement relative to the femoral canal. Leaning of the graft face against the ceiling of the femoral canal. Included implant guiding thread" pcs. 1017 ACL reconstruction: femoral fixation - Endobutton-type implant: sharply ended 13mm titanium plate combined with self-clamping, adjustable, knotless, polyethylene loops. Plate with a protruding ring to limit its displacement relative to the femoral canal. Leaning of the graft face against the ceiling of the femoral canal. The graft is suspended by four loops. The implant guiding thread is included. pcs. 1018 ACL Reconstruction: femoral fixation - Endobutton-type implant: pointed, elongated - 20mm, titanium plate combined with self-clamping, adjustable, knotless, polyethylene loops. The plate with a protruding ring that limits its displacement in relation to the canalPlease see Appendix 1 to PIC 1 Cannulated screws 4.0 mm. Thread diameters 4.0 mm, self-tapping and self-tapping, cannulation enabling introduction on the Kirschner wire with a diameter of 1.6. Head diameter 5.8 mm, core diameter 3.0 mm. Screws in lengths from 10 to 70 mm with a pitch of 2.0 mm, socket for star screws. Screws with short threads pcs. 1002 Kirchner wire. Steel, diameter 1,6 mm, length 150 mm pcs. 503 Cannulated screw washer 4.0. Material titanium, inner diameter 10 mm, inner diameter 5 mm pcs. 10004 Herbert type compression screw. Double threaded titanium screw, cannulated, self-drilling, self-tapping and self-tapping. Screw with self-drilling tip and triple cutting system at thread ends and screw head. Conical thread of the screw head causing additional compression. Screw diameter 2.8 mm, head thread diameter 3.7 mm, shank diameter 2.5 mm, core diameter 1.9 mm, Kirschner wire diameter 1.0 mm. Screws length from 12 to 34 mm with 1 mm pitch. 1005 Kirchner wire. Steel, diameter 1,0 mm, length 150 mm pcs. 506 Locked, locking, multidirectional, maximum angle 20 degrees, titanium, self-tapping, screw diameter with thread 3,0 mm, screw head diameter 4,0 mm, screw core diameter 2,1 mm, each next screw 2 mm longer, screw length from 12 mm to 30 mm pcs. 3007 Locked, locking, multidirectional, maximum angle 20 degrees, titanium, self-tapping, threaded screw diameter 3.0 mm, screw head diameter 4.0 mm, screw core diameter 2.1 mm, each next screw 2 mm longer, screw length from 32 mm to 50 mm pcs. 2008 Locked, locking, multidirectional, maximum angle 20 degrees, titanium, self-tapping, threaded screw diameter 3.0 mm, screw head diameter 4.0 mm, screw core diameter 2.1 mm, each next screw 2 mm longer, screw length from 52 mm to 72 mm pcs. 2009 Screw for spongy tissue locked, locking, multidirectional, maximum angle 35 degrees, titanium, self-tapping, screw diameter with thread 3.0 mm, screw head diameter 4.0 mm, screw core diameter 1.6 mm, each next screw 2 mm longer, screw length from 12 to 30 mm pcs. 20010 Spongeous tissue screw locked, locking, multidirectional, maximum angle 35 degrees, titanium, self-tapping, screw diameter with thread 3.0 mm, screw head diameter 4.0 mm, screw core diameter 1.6 mm, each next screw 2 mm longer, screw length from 32 mm to 60 mm pcs. 20011 Unlocked, pulling, titanium, self-tapping, self-cutting, screw diameter with thread 3.0 mm, screw head diameter 4.0 mm, screw core diameter 2.1 mm, each next screw 2 mm longer, screw length from 12 mm to 30 mm pcs. 20012 Unlocked, pulling, titanium, self-tapping, threaded screw 3.0 mm, screw head diameter 4.0 mm, screw core diameter 2.1 mm, each next screw 2 mm longer, screw length from 32 mm to 40 mm pcs. 20013 Locking screw, titanium, self-tapping, screw diameter 3,5 mm, screw core diameter 2,5 mm, screw head diameter 6,0 mm. Pitch length every 2 mm screw length from 10 mm to 30 mm pcs. 20014 Locking screw, titanium, self-tapping, screw diameter 3,5 mm, screw core diameter 2,5 mm, screw head diameter 6,0 mm. Pitch length every 2 mm screw length from 32 mm to 50 mm pcs. 20015 Locking screw, titanium, self-tapping, screw diameter 3,5 mm, screw core diameter 2,5 mm, screw head diameter 6,0 mm. Pitch length every 2 mm screw length from 52 mm to 78 mm pcs. 20016 Standard, titanium, self-tapping screw, screw diameter 3,5 mm, screw core diameter 2,5 mm, screw head diameter 6,0 mm. Pitch length every 2 mm screw length from 10 mm to 30 mm pcs. 30017 Standard screw, titanium, self-tapping, screw diameter 3,5 mm, screw core diameter 2,5 mm, screw head diameter 6,0 mm. Pitch length every 2 mm screw length from 32 mm to 60 mm pcs. For a detailed description of the order, please refer to Appendix 1 to ToR A "Anatomical plate, asymmetrical, made of titanium alloy, separately dedicated for left and right tibia (different anodisation) while maintaining the tibia back tilt profile. To be used on the anterior median tibial part of the tibia in corrections from 6 degrees to 16 degrees. Six-hole and eight-hole plate. Six self-tapping screws with a diameter of 4.5 mm available in lengths from 30 to 75 mm with a pitch of 5 mm. The plate is available with one or two holes for multi-axis screws and the plate with eight single-axis holesThe two multi-axis screws used in ACL reconstruction. Multi-axis screws for locking at +/- 12.5 degrees (25 degrees). "1 Six-hole plate right pcs. 1002 Six-hole plate left pcs. 1003 Reconstruction plate for simultaneous ACL right pcs. 204 ACL simultaneous reconstruction plate left pcs. 205 Eight-hole plate right pcs. 506 Eight-hole plate left pcs. 507 Self-tapping screw pcs. 20008 Barrier screw pcs. 1000B "Plate for closing osteotomy of high tibial bone: lateral (right, left) and medial (right, left), four-hole to pass. Pre-contoured implants: plate design for maximum compatibility between plate and bone. Longitudinal compression hole to optimize closure of the osteotomy. TA6V titanium alloy implants for mechanical optimization. Median plate: anterior-middle positioning for easier plate positioning. "9 Four-hole plate pcs. 8010 Self-tapping screw for closed osteotomy plates pcs. 16011 Barrier screw for closed osteotomy plates pcs. 160C\\\\ "Titanium alloy plate, separately dedicated for left and right femur (different colour) with asymmetric anatomical profile. Plate for use on the medial or lateral part of the distal femur. In the version for open osteotomy, two offset screw holes placed above the osteotomy to ensure mechanical properties and prevent loss of angulation correction, 8 locking screws, 1 multi-axial locking screw with a range of 25 degrees available in a length of at least 30mm-90mm with a pitch of 5mm. In the version for closed osteotomy, two holes for offset screws placed on both sides of the osteotomy providing mechanical properties and protecting against loss of correction angulation, 1 oval hole for compression screw, 7 locking screws, 1 multi-axis locking screw with a range of 25 degrees available in lengths of at least 30mm-90mm with a pitch of 5mm."12 Central thigh osteotomy plate closing right/left nine-hole pcs 5013 Side thigh osteotomy plate opening right/left nine-hole pcs 5014 Self-tapping screw pcs 90015 Cortical screw pcs 400 A "Airless shoulder endoprosthesis.Titanium shoulder element with four frame type arms, in three sizes 24mm, 28mm, 32mm.Shoulder head in sizes from 38 to 52mm, height 13-23mm. "1 Shoulder element pcs. 202 Shoulder head pcs. 20B "Shoulder endoprosthesis.Shoulder head in version for left and right limb, diameter 36-52mm.In the base of the head, channels for attaching nodules.Trauma stem in 12 sizes, diameter 5-18, length 70-200mm.The proximal part has anchor spikes to stabilize the nodules.3 Trauma stem pcs 204 Trauma head pcs 20C "Total anatomical endoprosthesis of the shoulder joint.Shoulder head in 11 sizes from 36 to 52mm. Height 12-24mm.denture blade part - cemented socket in 3 sizes.Cement-free pin in 9 sizes: diameter 5-18mm, length. 70-120mmCemented mandrel in 16 sizes: diameter 5-18mm, length. 70-200mmAbility to tilt the head against the mandrel between 113-165 degrees and retrotorssion +/- 30 degrees.Convertible to inverted dentures with the same mandrel. "5 Cemented or cement-free mandrel pcs 206 Anatomical head pcs 207 Head connector pcs 208 Anatomical acetabulum pcs 20D "Bipolar shoulder endoprosthesis.Shoulder element in sizes 42 to 53mm with 3mm increments, PE insert and head in three sizes for each acetabulum size.Cemented or cemented endoprosthesis mandrel pcs 1010 AS Bipolar Head pcs 1011 AS Bipolar Head insert pcs 1012 AS Bipolar Head pcs 1013 AS Bipolar Adaptor pcs 10E "Complete inverted shoulder endoprosthesis.9 Cemented or cementless mandrel pcs 1010 AS Bipolar Head pcs 1011 AS Bipolar Head insert pcs 1012 AS Bipolar Head pcs 1013 AS Bipolar Adaptor pcs 10E "Complete inverted shoulder endoprosthesis.9 sizes: diameter 5-18mm, length. 70-120mmCemented plunger in 16 sizes: diameter 5-18mm, length. 70-200mmCement-free paddle element made of tantalum - trabecular metal, fixed with screws and nuts to stabilize the angle of inclination.Head for paddle element in 36 and 40mm sizes.Shoulder endoprosthesis in 4 sizes and 4 offset versions.Polyethylene shoulder endoprosthesis in diameter 36 and 40mm in three heights.Total inverted shoulder endoprosthesis.Cement-free mandrel in 9 sizes: diameter 5-18mm, length. 70-120mmCemented plunger in 16 sizes: 5-18mm diameter, length. 70-200mmCement-free paddle element made of tantalum - trabecular metal, fastened with screws and nuts to stabilize the angle of inclination.Head for paddle element in sizes 36 and 40mm.Arm Arm element in 4 sizes and 4 offset versions.Polyethylene armrest insert of 36 and 40mm diameter in three heights "14 Cemented or cement-free stem pcs 8015 AS Reverse head base TM pcs 8016 AS Reverse head pcs 8017 AS Reverse base screws 2 pcs 16018 AS Reverse Cannulated drill bit 6mm sterile pcs 1019 AS Reverse Cannulated drill bit 2.5mm sterile pcs 1020 AS Reverse wire 2.5mm sterile pcs 1021 AS Reverse shoulder tray pcs 8022 AS Reverse shoulder tray insert pcs 80F "traumatic prosthesis: - monolithic injury spindle sprayed in the proximal part with a porous titanium alloy, sizes 4-14mm, each can be used for an inverted denture - two side wings, three holes in each, for proper attachment of the nodules - height adjustment of the seat of the spindle with the help of a screwed into the marrow channel of the positioner - head with infinitely adjustable offsetA detailed description of the subject of the order is included in Appendix 1 to the ToR. TITANIUM PLATES FOR PERI-PROSTHESIS FRACTURES - AN INSTRUMENTARIUM FOR UP TO 3 TYPES OF PLATES, CLOSER / FURTHER THIGH AND STRAIGHT PLATES GIVING THE POSSIBILITY TO CHOOSE THE TYPE OF PLATE DURING SURGERY+IMPLANTS.1 Titanium anatomical plate, with limited contact with the bone, blockage and compression to the distal femoral epiphysis to treat peri-prosthetic fractures. In the head of the plate, 8 cortical screw holes of 5.0 mm and 4.0 mm diameter; 4.0 mm cortical with rare thread; 5.0 mm spongy with partial thread; in the shank of the plate, rows of triple diagonal holes for 5.0 mm and 4.0 mm cortical screws; 4.0 mm cortical with rare thread; 5.0 mm spongy with partial thread and peri-prosthesis screws. Screws in the head and shank of the plate with a possibility of angularity of 15 degrees in each direction (possibility to obtain angular stability of the screw by means of a lockable 8.0 mm diameter cap after obtaining compression of the fragments by means of a cortical or sponge screw). Possibility of additional displacement of the plate from the bone by means of 1.2 or 3 mm long walks and use of plugs for unused holes. Blanking plugs with a diameter of 8.0 mm are screwed in with a 6 Nm torque screwdriver to reduce the tightening force. The plate can be used by means of a mini-invasive technique, using an external X-ray guide that is transparent to X-rays. Cables can be used together with a cable eyelet, whether or not blocked in the plate. Drill bits for drilling in cement included. Right and left-hand plates, with 9,12,15,18 and 21 shank holes, in lengths 238, 278, 317, 355 and 393 mm respectively. pcs. 402 Titanium anatomical plate, with limited contact with the bone, blocking and compression to the proximal femur for the treatment of periaprosthetic fractures. In the head of the plate there are 4 cortical screw holes of 5.0 mm and 4.0 mm diameter; 4.0 mm rare-threaded cortical; 5.0 mm spongy with partial thread; in the shank of the plate there are rows of triple diagonal holes for 5.0 mm and 4.0 mm diameter cortical screws; 4.0 mm rare-threaded cortical; 5.0 mm spongy with partial thread and peri-prosthesis screws. Screws in the head and shank of the plate with a possibility of angularity of 15 degrees in each direction (possibility to obtain angular stability of the screw by means of a lockable 8.0 mm diameter cap after obtaining compression of the fragments by means of a cortical or sponge screw). Possibility of additional displacement of the plate from the bone by means of 1.2 or 3 mm long walks and use of plugs for unused holes. Blanking plugs with a diameter of 8.0 mm are screwed in using a 6 Nm torque screwdriver to reduce the tightening force. The plate can be used using a mini invasive technique, with the help of an external X-ray guide that is transparent to X-rays. Cables can be used together with a cable eyelet, whether or not blocked in the plate. Possibility to use an additional tightening plate. Drill bits for drilling in cement included. Right and left-hand plates, with 9,12,15,18 and 21 holes in the shank, in lengths 245, 285, 324, 363, and 401 mm respectively. In addition, a short panel with one row of diagonal triple holes in a 115 mm long shank. pcs. 403 Twisting plate used as a cover plate for the perimeter plate for the proximal femur. The plate is narrow and wide, right and left. In the plate there are holes for Kirschner wire stabilization, holes for cable eyelet, holes for 3.5 cortical or locked bolts, and additionally for 4.0 and 5.0 cortical or sponge 5.0 bolts with a possibility of 15 degrees angulation in each direction (possibility to obtain angular stability of the bolt by means of a locked cap with a diameter of 8.0 mm after obtaining compression of splinters by means of 4.0 and 5.0 cortical or sponge 5.0 bolts) pcs 404 Plates bent to the femur shank. The shank shall be provided with holes for 3.5 mm diameter cortical and 4.0 mm diameter cortical and 5.0 mm diameter cortical and 5.0 single-cortical shank screws. Detailed description of the subject of the order is included in Appendix 1 to the ToR.

Opportunity closing date

28 December 2020

Value of contract

to be confirmed