Germany - Motor vehicles

Description

Zweckverband Abfallwirtschaft Region Hannover, Karl-Wiechert-Allee 60c, 30625 Hannover intends to procure on behalf and for the account of the City of Hannover, 4 truck chassis with three-way tipper and loading crane, divided into 2 lots.
Engine EURO VI E; fuel type: diesel; power: min. 100 kW - 130 kW; gross vehicle weight min. 7,000 kg max. 7,500 kg; off-road tires with coarse tread; wheelbase min. 4,100 mm max. 4,300 mm; maximum vehicle width (without exterior mirrors) 2.100 mm; drive on axles 1 and 2; differential lock on axles 1 and 2; engageable longitudinal differential lock; power take-off engaged from the driver's cab; indicator light on the instrument panel; braking system with automatic load-dependent control; automatic anti-lock braking system; electronic stability program; emergency brake assist; lane departure warning system; turn-off assistant in accordance with the recommendation of the German Federal Ministry of Transport, Building and Urban Affairs. the recommendation of the Federal Ministry of Transport and Digital Infrastructure, published in the Verkehrsblatt issue 19-2018, No. 149; rear view camera with LCD screen(color monitor) in the driver's cab (automatically switching on when the reverse gear is engaged). Mounting location of the monitor is determined by aha during the first acceptance (taking into account technical feasibility and legal requirements).Steering assistance; cab paint in municipal orange, based on RAL 2011; power windows for driver and passenger door; central locking; airbag for driver and passenger; min. height adjustable steering wheel; heated rear view mirrors, elt. adjustable; hydraulically suspended driver's seat, with 3-point safety belt, heatable, height-, tilt- and length-adjustable; hydraulically suspended front passenger's seat, with 3-point safety belt, heatable, height-, tilt- and length-adjustable; 4-seater bench seat in seat row 2 with 3-point safety belts on the outer seats; heating and ventilation system with air outlets on front windshield, driver and front passenger footwells and side windows; multistage blower for warm and fresh air supply; min. manual air conditioning of the driver's cab; radio system with Bluetooth hands-free system; toll device; grab handles in the area of the A-pillars for driver and front passenger; possibility of passage from seat row 1 to seat row 2; roof shelf above the windshield; 12 V socket in the driver's cab; rear wall window. Reversing warning device, in "whooshing version", self-adjusting 77-97 decibels. Trailer coupling ball head with min. towing capacity 3,300 kg; vehicle without EC control device (vehicles are not used commercially); warning marking red / white reflective according to DIN 30710; contour marking for driver's cab according to ECE 104 R; LED light bar in flat version (orange light) mounted on the vehicle roof, switchable via switch in the dashboard; It must be ensured that the chassis is suitable for mounting a three-way tipper with loading crane. The Contractor shall deliver the chassis free of charge to the body manufacturer described in Lot 2. A customer service workshop or a base with mobile service is required, which ensures that the repair of the truck chassis can begin within 24 hours. It must be stated whether a spare parts delivery service is available on a daily basis and, if so, how often it can be used on a daily basis. Additional warranty periods beyond the statutory warranty period are desired and must be stated. Dimensions of flatbed IL: approx. 3,100 mm x 2,100 mm x 400 mm; steel drop sides, hot-dip galvanized, painted on the outside in RAL 2011 municipal orange, can be folded down; drop side locks in corrosion-free design. Attachable leaf grate attachments of approx. 600 mm height are to be provided on the drop sides. The leaf grille attachments should cover approx. half of the platform length and be sloped towards the platform length. The end wall is to be designed accordingly. Platform floor made of sheet steel, hot-dip galvanized; 8 lashing rings, 4 on each long side embedded in the floor, according to VBG 12 §22; platform frame in hot-dip galvanized design; 5-stage tipper cylinder; tipper operation via separate cable remote control in the driver's cab incl. corresponding holder; 2 tool boxes underneath the platform, size adapted to the available installation space (min. 500 mm wide, min. 400 mm high, min. 400 mm deep), lockable lid, material in corrosion-free design; lockable aluminum box in platform width, installation location front wall, height approx. 600 mm, depth approx. 750 mm. The box is to be provided with 2 pieces; cover flaps, which must allow rainwater to run off (inclination to the rear approx. 2°); 1 piece extendable ladder at the front right below the loading floor; mounting location between platform body and driver's cab; crane deposit with mounted grab must take place on the loading area of the tipper. The basic length of the crane must be designed accordingly. Slewing range approx. 180 degrees; hydraulic design; lever load at maximum deflection approx. 700 kg; arm system in telescopic design to approx. 7,000 mm; crane protection incl. operating hour meter, drive motor start/stop, optical/acoustic overload indicator, optical height warning device, emergency/off device; crane control via radio remote control2 Operating stations on the left and right of the vehicle for all operating functions; if technically feasible on the chassis side, the support legs of the loading crane should point downwards in the driving position. If necessary, an existing side collision protection must be modified accordingly. The legal total width of 2550 mm must be observed! Support leg jib in hydraulic design; support leg plates mounted in pendulum bearings; support leg jib with red/white marking and warning light; 2 shims for the crane support legs incl. holder, 1 per side; support leg monitoring with center position monitoring; arm system monitoring for the crane in transport position; fill level monitored central lubrication system for the crane; clamshell bucket: nominal capacity approx. 60 to 80 l; overall width approx. 300 mm; compact gear unit without cylinder with detachable grab teeth (5 pieces); load hook with swivel and rotator; superstructure certificate from an official inspection organization in order to be able to approve the complete vehicle; warning marking red / white reflective according to DIN 30710 at the front, rear and side; contour marking for superstructure according to ECE 104 R; 2 pieces LED working lights, mounting location on front wall protection grille; 2 LED working lights, installation location at the rear in the area of the lamp supports; LED working lights for crane system; vehicle - ambient lighting, switchable from the driver's cab; installation and wiring of side marker lights; side underride protection on the left and right with hot-dip galvanized steel brackets on the superstructure; high-performance hydraulic pump; hand washing device with min. 15l water in the area of the loading crane operator's station. The hand washing device must be electrically heated via the vehicle's electrical system. The heater must only function when the drive engine is running. A customer service workshop or a support point with mobile service is required to ensure that repairs to the body can be started within 24 hours. It must be specified whether a spare parts delivery service is available daily and how often it can be used daily, if necessary.

Opportunity closing date

08 November 2023

Value of contract

to be confirmed