Poland - Modular and portable buildings

Description

The subject of the contract is the supply of tin garages and shelters, as well as workshop and office containers for the needs of the organizational units of the State Water Management Wody Polskie in the locations indicated in the description of the individual parts of the contract. Delivery shall also include, if required: foundation in the place indicated by the Orderer, installation in a manner appropriate to the subject matter of the contract, land preparation (leveling) and connection of electrical and water and sewage systems to the relevant connections indicated by the Orderer by persons with appropriate authorizations at the expense of the Contractor.
Part 1 - supply of 12 tin garages and one carport for the Regional Water Management Board in GliwiceLocation No. 1, Task No. 1 - purchase of two ZZ Katowice (NW Katowice) garages to secure the equipment owned:1: Construction of the ground for tin garages for NW KatowiceThe site requires preparation.2.: "Supply and installation of two tin garages for the needs of NW Katowice "Garage No. 1: Dimensions:- length (side) - 5.8m- width (front) - 6.0m- height (front) min. 2.20mRoof: single pitch.Color: RAL walnut or brown (to be agreed, e.g. RAL 8017, RAL 8004, RAL 3005).Construction:a) structure/skeleton - anti-corrosion protected angles fixed in a way that ensures stability and resistance to external influences,b) without an internal dividing wall,c) mono-pitched roof falling to the rear of the building made of trapezoidal sheet metal coated on both sides in RAL color,d) anti-corrosion felt under the roof,e) external walls made of sheet metal coated on both sides in RAL color,f) wide panel swing gates (2 pcs.) located on the front wall of the garage; separate for each position, entry light: 2.75 x approx.2.10m equipped with handles and locks with keys (5 keys for each gate),g) wall flashings,h) roof weathervanes,i) rivets in color,j) electrical installations k) lighting installation:l) ventilation installation Garage No. 2 Dimensions:- length (side) - 5.80m- width (front) - 5.0 m- height (front) min. 2.20m.Roof: single-pitched.Color: RAL walnut or brown (to be agreed, e.g. RAL 8017, RAL 8004, RAL 3005).Construction:a) structure/skeleton - anti-corrosion protected angles fastened in such a way as to ensure stability and resistance to external influencesb) without an internal dividing wallc) mono-pitched roof falling to the rear of the building of trapezoidal sheet metal coated on both sides in RAL colord) anti-condensation felt under the roof,e) external walls made of sheet metal coated on both sides in RAL colorf) wide panel swing gate (1 pc.) located on the front wall of the garage; on the left side of the structure, entry light: min. 2.75 x approx.2.10m equipped with handle and lock with keys (5 keys for each gate)g) external door - 1 pc on the front wall, next to (on the right side) the garage door with handle and lock (5 keys); opening to the outside.h) wall flashings,i) roof wind braces,j) rivets in color,k) electrical installations: l) lighting installation m) ventilation installationThe two garages will be sited side by side in one line.Method of installation and anchoring: according to the recommendations of the garage manufacturer.Location No. 2, Task No. 2 - purchase of a carport ZZ Katowice (ZW Meadow) to protect the equipment in its possession:Site requires preparation.Dimensions:- length (side) - 7.0m- width (front) - 5.0m- height (front) 3.5m.Roof: single pitch.Color: RAL gray/anthracite.Structure - steel:a) structure/steel skeleton,b) roof - sheet metal,c) anti-condensation felt under the roof,d) exterior walls made of sheet metal (3 sides removable, open entry),e) wall flashings,f) roof wind braces,g) rivets in the color of sheet metal,h) lighting installation:i) ventilation installation:Location No. 3, Task No. 3 - Purchase of 3 pcs. tin garages for ZZ Opole with dimensions of 5 x 6.80 m with a height of 3.80 m with lockable double doors to secure the equipment (description included in Appendix No. 2 to SWZ) Location No. 4, Task No. 4 - purchase of 9pc. Task no. 4 - purchase of 9 tin garages for ZZ Gliwice to secure their equipment - Łabędy lock (3 units), Dzierżno lock (2 units), Kłodnica lock (1 unit), Sławęcice lock (1 unit).) ZPH Kłodnica hydropower sluice 2 pcs.(description included in appendix 2 to the SWZ)Full description in the order documentation Location No. 1, Task No. 5 - purchase of workshop containers for ZZ Krakow (according to health and safety recommendations for storage of tools and fuels):Delivery and installation of 6 pieces of containers, including 5 storage containers and one workshop container for the needs of the Board of Water Catchment in Krakow.Delivery and installation address: - Przewóz water stage (sluice) Popielnik street Kraków 5 pieces - including: 4 pieces storage container + 1 piece workshop container - location (50.041601, 20.097704),- Water level Dąbie ul. Ofiar Dąbia Kraków 1 storage container - location (50.053502, 19.977149)Parameters: Container dimensions: length (side) - 6 m x width (front) - 2.5-3 m x height (front) 2.8 m.Roof: mono-pitched.Color: brown or gray (polyurethane paint) .Container construction:a) structure/skeleton: frame of cold-formed sections gr. min 4mm, columns from sections screwed to the upper and lower frameb) floor made of OSB - 22mm, PVC lining min 2mm, insulation: mineral wool 100mm with vapour-proof membranec) ceiling : covering with trapezoidal sheet metal (aluzinc), insulation - mineral wool min 100mm, roof membrane with vapour-proof membrane, internal covering - white laminated board min. 12mmd) external walls: external covering made of trapezoidal sheet metal (aluzinc), insulation: mineral wool min 100 mm, with vapour-proof membranee) internal walls made of white laminated board min 12mm thickf) PVC tilt-and-turn windows with dimensions of about 110x90 cm - 2 pcs.g) external steel doors 90x200 cm with three sets of keysh) electrical installations: in storage and workshop containers 1-phase, led in strips, including: fuse box with protection for each consumer separately, power supply connection from the outside protected by e.g. metal housing, double 230V outlet - 2 pcs. In addition, in the workshop container 320V power outlet (with32A protection) - 1pc. i) lighting installation: led ceiling lamp - 2pc. flush-mounted luminaire, led 2x length 120cm (18W) cold color 6000-6500K wall plafond - 2 pieces.j) ventilation installation: gravity ventilation - ventilation grilles - 2 pieces mechanical ventilation - exhaust fan - 1 piece.k) Additional equipment: all containers should be equipped with an electric oil heater with a 2000W regulator. In the storage containers should be installed: standing racks with a total length of 4.5m, a height of about 2.5m and a depth of shelves min 40 cm. Load capacity up to 120 kg. In the workshop container: metal workbench, with dimensions min 160x60 cm, with drawers for tools, and standing shelves with a total length of 3m and parameters as mentioned above.Location No. 2, Task No. 6 - purchase of a mobile garage for the Czaniec Water Reservoir, ZZ Żywiec for the protection of its equipment:Supply with installation of a tin garage for the needs of the Zywiec Water Board - Czaniec Water ReservoirParameters: Dimensions: length (side) - 6 m x width (front) - 5 m x height (front) 2,65 m. at the top.Dimensions of the entrance (after opening the gate): 2 m x width (front) - 2 m x height (front).Roof: gabled.Color: sides light brown, roof anthraciteConstruction:a) structure/skeletonab) gable roofc) anti-condensation felt under the roof,d) exterior walls made of trapezoidal sheet metal embossed horizontallyoe) windows 3 pcs. 80 cm x 60 cmf) up-and-over door 2mx2m g) external door 1 piece width 90 cmh) wall flashings, takij) roof wind braces, takj) rivets in anthracite colork) ventilation system: gravity ventilation - ventilation grilles - 2 pieces.Full description in the contract documents Part 3 - supply of corrugated sheet metal warehouse for the Regional Water Management Board in Lublin, Task No. 7 - Purchase of 1 piece of corrugated sheet metal warehouse with dimensions of 6.0x6.0 m., ZPT ZZ Zamosc, Lublin ProvinceDelivery and installation of a sheet metal warehouse (garage) for the needs of the Zamosc Water Management Board.Delivery and installation address: RZGW Lublin, Technical Support Team facilities in Lublin, 10a Niezapominajki St., 20-516 Lublin, Plot No. 92/13.The site does not require preparation (e.g. making a foundation), leveling.Method of assembly: manual assembly with the help of connecting elements (screws, sheet metal screws, etc. supplied by the Contractor with the warehouse). Installation of the warehouse structure on the ground of reinforced concrete slabs of road type, prepared by the Employer.Technical parameters and dimensions of the warehouse:- warehouse with external dimensions of 6.0 x 6.0m made of sheet metal, with a mono-pitched roof, with two swinging gates mounted in the front wall and an internal partition wall forming two separate rooms with dimensions of 6,0m x 3,0m,- width - 6,0m, - length - 6,0m, - front height 2,80m, - rear height 2,20m, - entrance height 2,00m, - mono-pitched roof to the rear with a longitudinal slope of 10%, - gates (2 pcs.) swinging, width min. 2,80m - warehouse structure - galvanized steel profile, - wall material - corrugated or trapezoidal sheet metal, min. 0,5 mm thick, color as per RAL 7035 ash grey,- mono-pitched roof made of corrugated or trapezoidal sheet metal, min. 0,5 mm thick, color as per RAL 7016 anthracite,- full metal flashing (roof and corner fittings), color as per RAL 7016 anthracite,- gates (2 pcs ) swinging, entry height min. 2,00 m, made of corrugated or trapezoidal sheet metal, min. 0,5 mm thick, color according to RAL 7035 ash grey, equipped with certified hinges for easy opening and closing, with locks (in the middle) lockable with a key,- complete guttering (metal gutter fi 75mm) installed in the lower part of the warehouse length of 6,00m together with downpipe fi 75mm, length min. 2,00m (guttering in anthracite color).Full description in the order documentation Part 4 - supply of a tin garage for the Regional Water Management Board in Rzeszów, Task No. 8 - Purchase of a tin garage for ZZ Stalowa Wola to secure its equipmentDelivery with installation of a tin garage for the needs of the Water Management Board in Stalowa Wola.Delivery and installation address: 36-121 Wilcza Wola ul. Wędkarska woj. podkarpackie plot number 5863/2 (exact address or registered plot number).Method of assembly: anchoring to concrete slab.Detailed technical description:Dimensions: length (side) - 7 m x width (front) - 7 m x height (front) 3,5 m.Dimensions of the entrance (after opening the gate): 3 m x width (front) - 2.5 m x height (front).Roof: gabled graphite color.Color: walls white.Construction:a) construction/standard frameb) gabled roof graphite colorc) anti-condensation felt under the roof,d) exterior walls made of white facade sheetinge) 2 double gates h.2.5 width 3 m.f) external door on the left side wall looking from the entrance standard dimensions g) rivets in sheet metal colorh) ventilation system: gravity ventilation - ventilation grilles - 2 pcs.Full description in the order documentation

Opportunity closing date

31 October 2023

Value of contract

to be confirmed