Poland - Industrial machinery

Description

Yep. Subject of the contract Proposed brand name, description and technical parameters Quantity /pc/pl/1 Battery angle grinder: 8pcs - Supply voltage: 18 V- Battery type: Li-ion- Battery to be operated: min / 5,0 / Ah- Idling speed: min 8 500 rpm Diameter of the disc: 125 mm- Number of batteries: 2- Charger- Case 2 Impact drill: 4 pcs.- Power: min 1 300 W- Maximum torque: from 43/20,5 Nm- No load speed: from 0-900/0-3 000 rpm- Number of shocks at nominal speed: from 15 300/51 000 1/min- Mounting range: 1,5-13 mm- Case 3 Drilling-driver cordless drill: 2 pcs - Power type: cordless- Battery voltage: 18 V- Battery included: yes- Number of batteries: 3- Battery capacity: min 5.0 Ah- Battery type: Li-lon- Impactor: yes- Number of gears: min 3- Soft torque: min 66 Nm- Hard torque: min 95 Nm- Speed: min 450/1 300/2 000 rpm- Charger- Suitcase4 Cordless screwdriver: 2 pcs - Battery voltage: min 7,2 V- Battery capacity: min 1,0/1,5 Ah- Battery type: Li-lon- Speed in 1 gear without load: min 200 rpm - Speed in 2 gear without load: min 650 rpm - Tool holder: hexagonal ¼" - Number of batteries: 2 - Charger - Case 5 Oscillating grinder: 1 pc - Input power: min 200 W - Speed: min 13 000 rpm - Frequency of oscillation: min 26 000 rpm - Diameter of oscillation: min 2.0 mm - Backing plate: Delta - Size of abrasive paper: 100x147 mm6 Straight grinder: 1 pc - Power: min 650 W - Speed: min 10 000/30 000 rpm - Adjustable speed: Yes - Clamping sleeve diameter: 6/8 mm 17 Belt grinder: 1 pc - Power: min 1 010 W - Belt speed: from 210 - 440 m/min - Belt width: 100 mm - Belt length: 610 mm - Dust bag - Suitcase Lp. Subject of the contract Proposed brand name, description and technical parameters Quantity /pc/kpl/1 Cordless hammer drill: 6pcs - Battery voltage: min 18 V Li-Ion- Battery capacity: min 3.0 Ah- Idling speed: from 0-1 100 rpm- Frequency of strokes at idle: from 0-4 000/min- Energy single. Impact: min 2,0J- Drilling capacity in concrete: min 20 mm, in steel: min 13 mm, in wood: min 26 mm - Tool holder type: SDS-PLUS- Batteries: 2 pcs,- Charger - Cases2 Concrete cutter: 1 pc - Nominal capacity: min. 2 400 W - No load speed: from 5 000 min-1 - Sander spindle thread: M14 - Disc diameter: from 300 mm - Hole diameter: 22.2 mm3 Demolition hammer: 1 pc - Rated power: min 1 510 W- Idle impact frequency: range from min 730-1 450 ud/min- Impact energy (EPTA): min 23.6 J- Tool holder: HEX 30 Type of impactor: electro-pneumatic - Point: 400 mm- Suitcase4 Mixer: 4 pcs - Supply type: electrical - Power: min 1 800 W - Speed: d0 1 050 rpm - Speed control: Yeah - Number of gears: 2- Max. agitator diameter: min 180 mm- Max. torque: min 45 Nm- Agitator fi 160 mm5 Gypsum grinding kit with vacuum cleaner: 1 vacuum cleaner - Power max: min 1 600 W- Air flow: min 75 l/s- Vacuum: min 280 mbra- Tank capacity: min 25 l+ Plaster grinder:- Power: min 750 W- Rotation range up to 1 500 rpm - Telescopic arms:- Sanding head diameter: min 21,5 cm- LED lighting - Bag6 Sludge box: 1 pc.- Nominal power: min 1 400 W- Idle speed: min 10 000 1/min- Diameter of diamond discs. 125 mm- Inner hole 22.23 mm- Cutting depth min 0-30 mm- Cutting width min 6-30 mm7 Metal cutting machine: 1 pc.-Power: min 2 200 W- Disc type: Aluminium oxide disc - Disc diameter: min 355 mm - Speed: min 3 800 rpm8 Impact wrench: 1 pc.-min 3-stage torque adjustment to the right and 1-stage torque adjustment to the left - Bolt size: min M 16- Idle speed min 7 000 rpm - Max.Tightening torque min 610 Nm- Max. tightening torque min 850 Nm9 Impact hammer: 1 pc - Power: min 1 100 W- Impact energy: min 8,3J- Max. impact number: min 2 900 min-1- Speed: min 500 rpm - Clamping type: SDS max- forging possibility- damping system- suitcase10 Electric tile cutter: 1 pc - power: min 1 200 W- motor: 230 V~- cutting length: min 120 cm- cutting discs: min 230 mm- water tank: min 40 L11 Pressure washer: 1 pc.- Power: min 3 000 W- Max. pressure: min 180 bar- Pressurisation capacity: max. min 600 l/h- Motor voltage 230 V- Hose length: min 10 m Lp. Subject of the contract Proposed brand name, description and technical parameters Quantity /pc/pl/1 Plate cutter: 3 pcs - Cutting length: min 93 cm - Tile size when cutting diagonally: min 65x65 cm - Cutting height: min 5-20 mm - Breaker power: min 1 000 kg2 Concrete trowel: 1 pcs - Fuel: unleaded petrol - Tank capacity: min 3,6 L - Engine power: min 5 hp - Diameter: min 920 mm - Number of blades: min 43 Vibration bar: 1 pcs.- Profile length: min 2 m- Motor power: min 1.0 HP- Fuel: petrol - Speed: min 7 000/min4 Paving cutter (guillotine): 2 pieces - Weight: max 41 kg- Max cutting length: min 330 mm- Max cutting height: min 120 mm- Cutting system: knife - Blade type: A5 Vibration rammer "jump": 1 pc.- Engine type: internal combustion, 4-stroke - Capacity: min 196 cm3- Power: min 4 kW / 5,4 hp - Fuel tank capacity: min 3,6 l- Centrifugal force: min 10 kN- Depth of density: min 40-60 cm6 Cutting machine, combustion saw for concrete cubes: 1 pc - Engine: 2-stroke petrol - Engine capacity: min 64 cm3 - Engine power: min 3,7 hp - Cutting depth max: min 115 mm - Disc diameter: min 350 mm - Disc rotation speed max: min 4 700 1/min7 Rod guide for strip type Jazon: 2 pcs.- 2 guides min 3 m- min 3 pcs.- min 3 pcs.- min 3 pcs.- min 3 pcs.- min 3 pcs.- min 3 pcs.- min 3 saddles8 Generating set equipped with a set of accessories for LPG operation: 1 pcs.- Fuel type: petrol or gas - sockets min 1 х 16 А; 1 x 32 А and output 12V- Engine power: min 13 KM9 Compressor piston compressor: 1 pc - Supply voltage 400 V/50 Hz- Tank capacity: min 270 L- Pump type: B5900B- Il. Pistons/il. compression ratio: min 2/2- RPM: min 1 370- Motor power: min 4.0 kW (5.5 hp) Lp. Subject of the contract Proposed brand name, description and technical parameters Quantity (pieces/kpl/1) Motor mower: 5 pieces.- Stroke volume: min 163 cm3- Adjustable cutting height: min 8-stroke- Stroke volume: min 70 l- Drive: on wheels- Speed: min 3.0/3.4/3.4/4.5 km/h- Housing: steel2 Exhaust cutter: 1 pc - Power: min 1.4 kW/1.9 hp - Stroke volume: min 36.3 cm3- Strip head Lp. Subject of the contract Proposed brand type/model/symbol name of article/equipment/devices Quantity / pieces/kpl/1 Bar blender: 1 piece - voltage: 230 V- Power: min 375 W- Capacity: min 1 litre/min 2 speeds: 17 000 and 21 000 revolutions per minute2 Wolf meat grinder: 1 pc - Power supply: 400 V - Approximate capacity: min 300 kg/h - Power: min 1.1 kW3 1-burner gas stove: 1 pc.- Power: min 9 kW - TG 110- Dimensions: (600-700)x(600-700)x(350-400) mm4 Gas kitchen, 4 burners: 1 pc.- Gas power: min 24 kW- Dimensions: (900-1000)x(900-1 000)x(850-900) mm - Stainless steel construction - Iron grates - 7 kW burners - 2 crowns5 Pot 9l stainless steel: 4 pcs. - Made of stainless steel with cover - Capacity: 9 lp. Proposed brand name, description and technical parameters Quantity /pc/pl/1 Laser distance meter: 2pcs - Range: min 200 m- Accuracy of measurement: ± 1 mm- Resistance class: min IP 652 Laser for laying tiles: 2pcs - Range: min 7m- Accuracy: ± 0.5 mm/m- Working time: min 15h- Laser class: II- Laser type: 635 nm, < 2mW3 Self-levelling laser for determining the vertical / horizontal: 1 pc - Accuracy; min ± 0.30 mm- Number of beams: 2- User Range: min 15 m4 Line laser: 1 pc.- Projection: min 3 lines - Accuracy: ± 0.2 mm/m - Range: min 30 m - Maximum range with receiver: min 120 m - Self-levelling range: min ± 4 - Immunity class: min IP54- powered by lithium-ion battery with min 12 V - battery min 2.0 Ah- Charger - Laser target plate - Cover case - Universal mount BM 1- Case 5 Paint roller filled directly from paint container: 12 pcs.- Paint container capacity: min 650 ml- Width: 235 mm6 Scoop-type blade: 5 pcs - Made of high-quality steel - Width: min 22 cm7 Straight-type blade: 5 pcs - Made of high-quality steel8 Universal barrow: 4 pcs - Capacity: min 80 l- Wheel with pneumatic tyre and steel rim9 Two-wheeled barrow: 2 pcs - Capacity 160 l10 Mobile scaffolding: 5 pcs - Working height: min 6.85 m + rollers - Load capacity: min 200 kg / m211 Tool set 1 KV for electrician: 7 pcs - Suitcase equipped with the most useful tools for electrician with a set of socket wrenches,- min 100 el.12 Aluminium ladder: 2 pcs. - 3-segment ladder - Unfolded as a standing, pull-out or hinged ladder - Working height: min 6 m13 Wheelbarrow hand wheelbarrow: 1 pcs. - Transport of cartons, containers, bags and crates - Two-wheel hand wheelbarrow - Load capacity: min 250 kg- Platform dimensions: min 500x200 mm14 Spray gun: 1 pcs. - Nozzle size: 1,4 mm - Capacity: 410 l/min - Capacity: 0,6 l15 Halogen spotlight with tripod: 2 pcs. - 2x400 W halogen luminaire on a telescopic tripod - Voltage: 230 V16 Optical leveller + tripod + staff: 1 pc - telescope length min 215,- Accuracy of 1 km of double levelling min 1,5,- Magnification: min 28,- Diameter of lens min 36,- Field of view min 1o25,- Resolution min 3,5,- Minimum focal length min 0,2.

Opportunity closing date

05 August 2019

Value of contract

£0-100k