Germany - Elevator installation

Description

A passenger and freight elevator is planned for the development of the planned building.Essential regulation: DIN EN 81-20/50Transport goods:- 2 Euro pallets at the same time (each L: 1.20m x W: 0.80m)- Lift truck- Gas cylinder transport as special trip without
Description of the elevator systemFor the development of the planned building, a passenger and freight elevator is planned.The elevator is mainly used for load transport, the access is via the stairs. The suitability for use by persons with disabilities is taken into account.Essential regulation: DIN EN 81-20/50Transport goods:- 2 Euro pallets at the same time (each L: 1.20m x W: 0.80m)- Lift truck- Gas cylinder transport as a special trip without an escortData of the elevator system:Load capacity: approx. 2.600kgSpeed: 1.0m/sCar width: 1.75mCar depth: 2.85mCar height: 2.30mDoor width: 1.60mDoor height: 2.10mStops: 7, ground to ground floorCar height: 25.85mShaft head: 4.0mShaft pit: 1.70mShaft width: 2.60mShaft depth: 3.30mDoor type:Automatic, 4-part, centrally opening sliding doors according to EN81-58 / E90.Drive:Machine room-less el. traction sheave drive.The drive is arranged in the shaft head.The control / switch cabinet if possible in the upper landing area adjacent to the shaft.Equipment:- Shaft doors made of stainless steel in linen structure- Surrounding frames made of stainless steel in linen structure- Cabin walls made of stainless steel in linen structure- Double ram protection / base made of ground stainless steel, approx. 20mm x 100mm- Ceiling as suspended white sheet steel ceiling with LED light spots- Tableau deck plates made of ground stainless steel- Pushbuttons made of stainless steel, approx. 24mm diameter, call acknowledgement- Car panel with priority key switch- Exterior panels with buttons as above, without key switch- Direction of travel and floor indicators in LED technology- Floor panels and indicators with polished stainless steel cover plates arranged in the perimeter frameDisabled access equipment / components in accordance with DIN EN81-70:- Tableau cover plates made of polished stainless steel DIN EN81-70:- Pushbuttons approx. 24mm diameter- Tactile labeling on the pushbuttons- Voice announcement in the car- One handrail on the side wall of the tableau as a stainless steel tube, approx. 40mm diameter

Opportunity closing date

01 November 2022

Value of contract

to be confirmed