Germany - Agricultural machinery

Description

Delivery of 1 tandem water tank trailer for use on existing four-wheel drive tractor Claas Arion 660 Cmatic (lot 1).Delivery of 1 rear-mounted spreader for winter service use for mounting on existing four-wheel drive tractor Claas Arion 660 Cmatic (lot 2).Delivery of 1 branch saw for mounting on existing hydraulic extension arm Greentec Scorpion 730-8S (lot 3).
Delivery performance of 1 piece tandem water tank trailer for use on existing all-wheel drive tractor Claas Arion 660 Cmatic with the following minimum requirements:Technical data- GRP tank tank- tank volume from 10,000 to 12,000 liters- permissible total mass from 15,000 to 17,000 kg- tare weight max. 5,000 kg- suitable for speeds up to min. 40 km/h- trailer height from 560 to 580 mm- tandem axle for high off-road mobility- 2-conductor air brake system- rigid drawbar for bolt 38 mm, including crank support foot. Other equipment- robust and low-wear steel construction, suitable for construction site use- mud flaps on all axles- lighting system according to StVO- tank baffles according to requirements- suction connection for automatic filling of the tank in the direction of travel on the right side, incl. compressor system, drive via rear towing gear Compressor system, drive via rear PTO of the all-wheel drive tractor, speed 540 rpm- Pressure pump for water distribution- Spray nozzles, spray bars or similar for water distribution at the rear, spraying width min. 3,000 mm- Filling nozzle on top of tank Delivery performance of 1 piece rear-mounted spreader for winter service use for mounting on existing all-wheel drive tractor Claas Arion 660 Cmatic with the following minimum requirements:Technical data- 3-point attachment Cat. 3- Hopper capacity min. 1,000 liters- Payload min. 1,100 kg- Variable spreading width range from 1,000 to 8,000 mm- Dead weight max. 250 kg- Filling height max. 1,500 mm- Filling width min. 1.000 mmOther equipment- Robust and low-wear (stainless) steel construction- Hydraulic spreading disc drive- Infinitely variable disc speed- Speed-dependent quantity regulation- Mud flaps to protect the rear of the vehicle- LED lighting according to StVO as well as LED work lighting- Remote control for controlling all functions of the mounted spreader, including work lighting- Incl. all necessary hydraulic hoses and electric lines (only delivery performance without attachment) Delivery performance of 1 piece branch saw for mounting on existing hydraulic extension arm Greentec Scorpion 730-8S with the following minimum requirements:Technical data- Vertical working width from 1,800 to 2,200 mm- Cutting size (branch diameter) up to min. 15 cm- Working speed (basic unit) min. 4 km/h- Requirement oil quantity max. 90 l/min- Robust and low-wear steel construction- Own weight max. 200 kg

Opportunity closing date

16 October 2023

Value of contract

to be confirmed