United States - 66--Stryker-SPS Surgical Instruments

Description

Added: May 01, 2019 10:07 am

This is a combined synopsis/solicitation for commercial supplies/services prepared in accordance with the format in Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a request for quotes under solicitation number: 36C26219Q0664

The Department of Veterans Affairs Contracting Office has a requirement for Surgical Instruments that meets the following salient characteristics with brand name and manufacturer. The Contractor shall furnish all supplies/services at VA Loma Linda Healthcare System 11201 Benton Street, Warehouse Bldg. 1C05, Loma Linda, Ca 92357.

1806-9901 1 T2 Basic Long Instrument Kit

(includes all items listed below)

1806-0022 GUIDE WIRE RULER

1806-0032 T2 AWL PLUG 1806-0041

AWL CURVED 1806-0110

UNIVERSAL ROD 1806-0125

REDUCTION SPOON 1806-0130 WRENCH

8mm / 10mm 1806-0135 INSERTION

WRENCH 10mm 1806-0150 STRIKE

PLATE 1806-0170 SLOTTED HAMMER

1806-0185 TISSUE PROTECTION

SLEEVE LONG 1806-0203 3.5MM

SCREWDRIVER SELF-HOLDING EXTRA SHORT

1806-0215 DRILL SLEEVE LONG

1806-0227 SCREWDRIVER SHAFT AO

LONG 1806-0233 3.5MM SCREWDRIVER

SELF-HOLDING LONG 1806-0268 T2

SCREWDRIVER SHAFT COMP. 1806-0271

GUIDE WIRE PUSHER 1806-0315

TROCAR LONG 1806-0325 SCREW

GAUGE LONG 1806-0331 T2 X-LONG

SCREW MEASUR. GAUGE 1806-0350 T2

EXTRACTION ROD CONICAL 1806-0365

SCREW SCALE LONG 1806-1095 SHAFT

COMPLETE FOR 1806-1095 1806-1096

02-3 5MM GUIDE WIRE HANDLE CHUCK

1806-2014 RIGID REAMER 1806-9900

T2 Basic Long Instrument Tray

702429 TEARDROP HANDLE AO COUPLING

703165 ANT / RET FEMORAL DRILL GUIDE 1 SE

0225-6025 2 0225-6025 MINI TRAUMA KIT EQUIPPED

O 18INCLUDES ALL ITEMS LISTED BELOW

Cat # Item Description 0225-6020

REAMER RACK 09-18 0225-6045

METAL TRAY SMALL 0226-3090

MODULAR REAMER HEAD 9mm 0226-3095

MODULAR REAMER HEAD 9.5mm 0226-3100

MODULAR REAMER HEAD 10mm 0226-3105

MODULAR REAMER HEAD 10.5mm

0226-3110 MODULAR REAMER HEAD

limm 0226-3115 MODULAR REAMER

HEAD 11.5mm 0226-3120 MODULAR

REAMER HEAD 12mm 0226-3125

MODULAR REAMER HEAD 12.5mm 0226-3130

MODULAR REAMER HEAD 13mm 0226-3135

MODULAR REAMER HEAD 13.5mm

0226-3140 MODULAR REAMER HEAD

14mm 0226-3145 MODULAR REAMER

HEAD 14.5mm 0226-3150 MODULAR

REAMER HEAD 15mm 0226-3155

MODULAR REAMER HEAD 15.5mm 0226-3160

MODULAR REAMER HEAD 16mm 0226-3165

MODULAR REAMER HEAD 16.5mm

0226-3170 MODULAR REAMER HEAD

17mm 0226-3175 MODULAR REAMER

HEAD 17.5mm 0226-3180 MODULAR

REAMER HEAD 18mm 1 SE

0227-3000S 3 0227-3000S STERILE MODIFIED

HALL MODULAR SHAFT 450mm 1 EA

1320-6100 4 1320-6100 GAMMA 3 INSTRUMENT TRAY

BASIC - COMPLETE (Includes all items

below)

1320-0011 ONE STEP CONICAL

REAMER 1320-0026 MULTIHOLE

TROCAR SHORT 1320-0031 CONICAL

REAMER SLEEVE SHORT 1320-0065

SCREWDRIVER 8mm BALL-TIP T-HANDLE

1320-0066 SPREADING TIP

SCREWDRIVER 1320-0090 NAIL

HOLDING SCREW 1320-0111 TARGET

DEVICE GAMMA3 (THREADED POST)

1320-0130 LAG SCREW GUIDE SLEEVE

1320-0140 DRILL GUIDE SLEEVE

4.2mm FOR LAG SCREW 1320-0150

K-WIRE SLEEVE 1320-0180 LAG

SCREW RULER 1320-0191 LAG SCREW

STEP DRILL GAMMA3 Ø10.5X495 MM

1320-0200 LAG SCREW DRIVER

1320-0215 NEW DRILL SLEEVE LONG

1320-0233 SET SCREWDRIVER

FLEXIBLE SHAFT 1320-0315 NEW

TROCAR LONG 1320-1118 SPEEDLOCK

SLEEVE 180 1320-3010 ONE SHOT

DEVICE GAMMA3 1320-9100 GAMMA 3

INSTRUMENT TRAY BASIC - EMPTY

1806-0041 AWL CURVED 1806-0185

TISSUE PROTECTION SLEEVE LONG

1806-0233 3.5MM SCREWDRIVER

SELF-HOLDING LONG 1806-0325

SCREW GAUGE LONG 1806-0365 SCREW

SCALE LONG 1806-0480 SCREW GAUGE

1806-1095 SHAFT COMPLETE FOR

1806-1095 1806-1096 02-3 5MM

GUIDE WIRE HANDLE CHUCK 702628 ASNIS

III 6.5/8.0 ELASTOSIL T-HANDLE WITH LG

AO 1 SE

1320-0011 5 GAMMA 3 INSTRUMENT TRAY BASIC -

COMPLETE Includes all items below)

1320-0011 ONE STEP CONICAL

REAMER 1320-0026 MULTIHOLE

TROCAR SHORT 1320-0031 CONICAL

REAMER SLEEVE SHORT 1320-0065

SCREWDRIVER 8mm BALL-TIP T-HANDLE

1320-0066 SPREADING TIP

SCREWDRIVER 1320-0090 NAIL

HOLDING SCREW 1320-0111 TARGET

DEVICE GAMMA3 (THREADED POST)

1320-0130 LAG SCREW GUIDE SLEEVE

1320-0140 DRILL GUIDE SLEEVE

4.2mm FOR LAG SCREW 1320-0150

K-WIRE SLEEVE 1320-0180 LAG

SCREW RULER 1320-0191 LAG SCREW

STEP DRILL GAMMA3 Ø10.5X495 MM

1320-0200 LAG SCREW DRIVER

1320-0215 NEW DRILL SLEEVE LONG

1320-0233 SET SCREWDRIVER

FLEXIBLE SHAFT 1320-0315 NEW

TROCAR LONG 1320-1118 SPEEDLOCK

SLEEVE 180 1320-3010 ONE SHOT

DEVICE GAMMA3 1320-9100 GAMMA 3

INSTRUMENT TRAY BASIC - EMPTY

1806-0041 AWL CURVED 1806-0185

TISSUE PROTECTION SLEEVE LONG

1806-0233 3.5MM SCREWDRIVER

SELF-HOLDING LONG 1806-0325

SCREW GAUGE LONG 1806-0365 SCREW

SCALE LONG 1806-0480 SCREW GAUGE

1806-1095 SHAFT COMPLETE FOR

1806-1095 1806-1096 02-3 5MM

GUIDE WIRE HANDLE CHUCK 702628 ASNIS

III 6.5/8.0 ELASTOSIL T-HANDLE WITH LG

AO 1 SE

1320-0210 6 GAMMA 3 OPTIONAL INSTRUMENT TRAY

1320-0210 GAMMA 3 SET

SCREWDRIVER 1320-9105 INSTRUMENT

TRAY, OPTIONAL 1407-4006 NAIL

EXTRACTION ADAPTER 1806-0020

GUIDE WIRE RULER 1806-0110

UNIVERSAL ROD 1806-0125

REDUCTION SPOON 1806-0130 WRENCH

8mm / 10mm 1806-0170 SLOTTED

Hammer 1806-0232 SCREWDRIVER

LONG 1806-0460 DRILL SLEEVE

4.2mm 1320-0041 CANNULATED

CUTTER 1320-0042 SLEEVE FOR

CANNULATED CUTTER 1320-0112

GAMMA 3 U WIRE FOR K WIRE CLIP

1320-0160 FRAGMENT CONTROL CLIP

1320-0170 FRAGMENT CONTROL

SLEEVE 702634 ASNIS III 6.5/8.0 LG A0

COUPLING-HALL FITTING 1 SE

The solicitation will be in accordance with FAR Part 12, 13, and 19, Acquisition of Commercial Items, Simplified Acquisition Procedures, Small Business Programs, and Veteran Affairs

Acquisition Regulations as supplemented with additional information in this notice. The North American Industrial Classification System (NAICS) code for this requirement is 339112 Size Standard 1000 Employees. The Contractor shall adhere to all federal and state laws and regulations in effect during the term of this contract. The Government intends to award a firm-fixed-price contract. The Contract begins on the date of award. Responses to the solicitation shall be due on Monday, May 6, 2019 at 3:00PM PST. Offerors are advised that it is your responsibility to review and monitor the website frequently to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to LaTricia Williams, Contracting Specialist at Latricia.williams2@va.gov with "36C26219Q0664 in the subject line within 24 hours of release of this notice. Telephone inquiries will not be honored. Inquiries after the allotted period may not be responded to due to the time constraints of the procurement. All offerors must be registered in www.sam.gov to do business with the Government. Ensure your registration is correct, current and has not expired. Please include your DUNS number on your quote and a point of contact with email/phone number.

Opportunity closing date

06 May 2019

Value of contract

to be confirmed