Ireland - Reconfiguration of HSSD Department at Mayo University Hospital Castlebar

Description

The project consists of the reconfiguration of the HSSD Department on
a phased basis to allow the facility to operate during the reconfiguration
works. The objective is to provide 4 number autoclaves to comply with
decontamination and infection control guidelines particularly passthrough
arrangements from dirty to clean and comply with (HTM 01 01)
- Decontamination of surgical instruments and (HBN 13) - Planning and
design of sterile services departments. The existing configuration of the
autoclaves to be decommissioned as part of the works does not facilitate
pass-through sterilisation.
The 4 number pass-through autoclaves will comprise,
1) The relocation of one existing unit titled AC.01 on the existing
survey drawing from the existing bank of autoclaves which was supplied
by Manepa Medical 628B Jordanstown Ave., Greenogue Business Park,
Rathcoole, Dublin. Tel. (01) 4677600. It is the responsibility of the Works
Contractor prepare the area and to relocate and recommission the
existing steriliser. Details of the existing Manepa unit is provided as
background information in Appendix 3 to the tender pack. Prior to the
above the existing autoclave 02 (Ac.02) shall be decommissioned and
removed from site due to its poor condition and autoclave 03 (AC.03)
shall be relocated into the position of AC.02. The works contractor will
be responsible for engaging the specialist supplier to remove AC.02 and
relocate AC.03 and recommission AC.03 in its new location.
2) There will be 2 number new autoclaves purchased by the
Employer and installed by the supplier during the works. The proposed
sterilisers will be ZentraCERT, type 7200 supplied by Sterval, Unit 14
Thompson Enterprise Centre, Clane Business Park, Kilcock Road, Clane,
Co. Kildare, Tel. (01) 5547399, subject to HSE procurement. The supplier
will be responsible for commissioning and validating the new units. The
Works Contractor will be responsible for preparing the area and
providing mechanical and electrical services a

Opportunity closing date

26 May 2022

Value of contract

to be confirmed