Italy - Public buses

Description

Supply of n. 4 (four) city buses with standing passengers "Class I" fully low-floor with direct injection diesel engine, positioned in the rear compartment, with exhaust gas emission limits at Euro 6 standard and with chassis not derived from a truck. The buses must have the floor, measured at the entrance of the doors and in running order, of a height not exceeding 360 mm. The interior corridor shall be free of transverse steps, with the exception of that of the rear seat, if any. The length shall preferably be 9,00 m, the width preferably less than 2 400 mm. Lot 2 Supply of n. 2 (two) interurban buses with standing passengers "Class II" double-decker low-floor double-deck, with direct injection diesel engine, positioned in the rear compartment, with exhaust gas emission limits at Euro 6 standard. The length shall preferably be 13,00 m (± 20 cm), the width between 2500 mm and 2 550 mm. Lot 3 Supply of n.7 (seven) interurban buses with standing passengers "Class II", not derived from the urban with direct injection diesel engine, positioned in the rear compartment, with exhaust emission limits of polluting gases at Euro 6 standard. The buses must have the internal walking surface, measured at the doors and in running order, approximately 850 mm high. The internal corridor shall preferably be free of transverse steps, except for that of the pentaposis. The maximum length shall be 12,30 m, the width between 2 500 mm and 2 550 mm.

Opportunity closing date

22 January 2020

Value of contract

£1m-5m