Poland - Lamps and luminaires

Description

1 The subject matter of the contract under the investment task n.a: "Modernization of street lighting in the Stanin Commune" is the delivery of luminaires with accessories and installation materials, consisting in the installation of delivered road lighting luminaires with LED sources, in a selected area of the Stanin Commune described in detail in Appendix 1 to the ToR. Quantitatively, the scope of modernization consists of: a. Replacement of street lighting fixtures and sports field lighting fixtures ORLIK:- execution of the executive design and agreement with the local Distribution System Operator - PGE Dystrybucja SA Rejon Siedlce, before the beginning of the installation and conclusion of the agreement with OSD on cooperation in modernization of road and street lighting,- disassembly of 1101 units. existing luminaires,- delivery of street lighting fixtures, consistent with the submitted offer, in the place of installation works in the amount of 1065 pcs. of LED street lighting fixtures and 36 pcs. of LED floodlights, having functionality of variable power profile and group, power profile change. The level of programming of the 24-hour cycle power supply of the supplied luminaire should take into account both the requirements of the PN-EN 1320 street lighting standard as well as the requirements set out in the Ordinance of the Minister of Economy of May 4, 2007, on detailed conditions for the operation of the power system (Journal of Laws No. 93/2007, item 623, as amended),- installation of the supplied outdoor lighting fixtures on extension arms and poles in accordance with the "Description of requirements concerning the efficiency and functionality of the modernized road lighting system in the Stanin Municipality". (tables), in the amount of 1101 pcs,- installation of power supply cables (luminaire - protection) with a length of about 4 m for a set for overhead line poles and about 12 m for a set for cable line poles,- installation of protection for all luminaires. For overhead line and cable line: 4A fuse liner, - replacement of AL/Cu current clamps for all overhead line luminaires. At the connector on the non-insulated line, use a clamp adapted for mounting on non-insulated lines, at the connector on the insulated line the clamp adapted for mounting on the insulated line, - replacement of the extension arms with galvanized single-arm luminaires for luminaires modernized on overhead lines with geometric parameters resulting from photometric calculations, mounted on the top and in justified cases, when mounting on the top is impossible to the side of the pole in the amount of 1 065 pcs,- measurements of the effectiveness of the protection against electric shock, - measurements of resistance to earth and insulation of wires and cables, - measurements of lighting intensity for five sections of modernised lighting indicated by the Employer, and if any of the measurements of lighting intensity does not confirm the levels from the submitted offer, carrying out 100% intensity control of modernized lighting covered by the project, at the expense of the Contractor - within a period not longer than 14 days,- making measurements of installed power and cos for all modernized lighting circuits - with a clamp meter,- checking the continuity of power supply cables wires,- making designs of temporary traffic organization with its introduction,- preparing as-built documentation.b. Construction and installation of road lighting in the village of Borowina (Borowina Gąsecka) - construction of a new lighting cable line with a length of 258 m,- delivery of lighting cable AsXSn on the overhead line with a length of 218m,- construction of 3 new steel lighting poles with a height of 8m, with an extension arm, on the cable line with the installation of 3 pcs. street lighting fixtures,- supply and installation of 4 pcs. of lighting fixtures on extension arms on existing overhead line poles supplied with a proven AsXSn cable - supply and installation of 1 pcs. of new lighting cabinet equipped with control and safety devices.c.d

Opportunity closing date

30 January 2020

Value of contract

to be confirmed