Germany - Laboratory equipment, optical instruments and precision instruments (except glasses)

Description

The invitation to tender is for basic laboratory equipment for equipping a laboratory with an area of approx. 62 m2 with:- built-in basin and fittings,- emergency shower,- laboratory furniture,- worktops,- weighing table,- ultrapure water system.and a laboratory with an area of approx. 27 m2 with:- built-in basin and fittings,- emergency shower,- laboratory furniture,- worktops.and a storage room with an area of approx. 10 m2 with:- shelves,- gas cylinder cabinet,- chemical cabinet.all services should include transport, assembly or installation, disposal of packaging and service.for further details please refer to section 2.1 of the service description.it is expected that the institute will move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by approx. one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A sterile bench and an autoclave with the following performance parameters will be tendered: sterile bench - microbiological safety cabinet with performance criteria according to DIN 12469, with motorised front screen, one 230V socket, two side screens with 3 media connections each, diameter 19 mm.mm- undercarriage: Seated workstation (1.2m) with adjustable feet- UV lamp for 0.9m + 1.2m, switchable via control unit with UV timer- Transport, installation, disposal of packaging and service autoclave- Steam sterilizer with jacket cooling, without support pressure, for open vessels and can be used as stand-alone unit- Usable chamber volume 100 L, Chamber dimensions approx. 750 mm height and 400 mm diameter- Operating overpressure 2.8/-1bar, sterilizing temperature 98oC - 137oC- Safety quick-release lock with lip seal- Separate steam generator with dry heating element integrated in the unit- Integrated storage tank for demineralized water for steam generation (can also be filled manually), Fill level monitor- thermal barrier according to TRB 402 and DIN 61010-2- flexible reference sensor for liquid sterilization (time triggering via media temperature)- gravitational venting as well as pressure change venting (destruction sterilization)- integrated exhaust steam condensation, water-cooled, temperature-controlled, adjustable- safety valve, TÜV-certified component- Internal memory chip for storing up to 150 readable cycles- Interface for data transfer- Collective connection for drain pipe- Floor support in interior- Integrated exhaust air filtration- Powder-coated trim- Integrated rapid recooling- Double jacket cooling from integrated storage tank- No cooling water consumption- Fully automatic microprocessor control for various self-configurable programs (solids programs, liquid waste program)- Transport, installation and serviceIf a manufacturer or service company is required, the unit can be supplied with the unit. For the sterile bank and autoclave, the availability of technical support must be indicated as follows: "Answers to technical questions will be provided within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m." The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A high-resolution liquid chromatography system and a gas chromatography system with the following performance parameters:HPLC and GC - common requirements:- Both instruments use an electronic evaluation system (software). Preferably the software "Chromeleon" should be used or at least similar or compatible to it. The evaluation software must enable the implementation and development of your own substance data banks.- Delivery and installation of computer hardware (PC with monitor, keyboard and mouse or alternatively laptop, current Windows operating system) to operate the system and the software.If a manufacturer's or dealer's warranty is granted, this must be stated.For HPLC and GC, the availability of the technical support must be stated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 and 18 hrs."High resolution liquid chromatography (HPLC):The system to be procured shall consist of an HPLC system with UV-DAD detector, an RI detector and a fluorescence detector.for further details, please refer to section 2.3 of the specifications.gas chromatography system (GC)The system to be procured shall consist of a GC system with FI detector.for further details, please refer to section 2.3 of the specifications.It is expected that the Institute will move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A qPCR system, a microliter centrifuge, an evaporator/concentrator, a micro/precision balance, a PCR workbench and a complete electrophoresis system with power supply with the following performance parameters are tendered:QPCR- Compact and low-noise device for quantitative real-time PCR- Stand-Alone operation (or corresponding software, if possible also in German) - Sample block with capacity for 96-well microtiter plates, or 96x 0.2μl Standard PCR Vessels- Gradient function- At least 2 duplex channels- Maximum heating rate of at least 8oC/s- High temperature control accuracy of at least 0.5 oC- Scan time of max. 12 seconds per channel- Delivery, installation, disposal of packaging and introduction training on siteMicroliter centrifuge- Tabletop unit with low noise level and switchable cooling function- Temperature range: approx. -5 to +40 oC- Infinitely variable temperature control of 1 oC- Pre-cooling function and stand-by cooling- Rotor unit for min. 20 sample tubes (1.5 and 2 ml)- Max. Speed: min. 14.000 rpm- Max. RZB: min. 20.000 x g- Rotor with aerosol tight cover- Transport, installation, disposal of packaging and service evaporator/concentrator- -For drying and concentration of small-volume DNA and RNA samples by evaporation by means of applied vacuum- independent control of heating and throughput time- rotor unit for min. 20 sample vials (1.5 ml vials)- Various pre-installed drying rates- Low noise level- Integrated oil-free vacuum pump- Chemically resistant chamber- Transport, installation, disposal of packaging and serviceMicro/precision scales- Up to approx. 2500 g maximum capacity - 10 mg readability - automatic internal calibration - weighing pan dimensions approx. 150 mm- Delivery, installation, disposal of packaging and servicePCR-Workbench- Integrated short wave UV tubes (254 nm) for easy decontamination between experiments- Adjustable timer for UV irradiation up to 12 h- Safety switch for automatic switch-off of the UV light when the door is opened- Delivery, installation, disposal of packaging and service- Inside two sockets- Optional: Daylight lamp- window UV-impermeable gel electrophoresis complete system- a watering trough for the tray with a size of about 8x10 cm, with at least 2 comb positions- a gel chamber with tray for the size mentioned- at least 2 combs with at least 10 teeth each, 1 mm thick - including power supply - at least 300 Volt voltage, 400 mA current, adjustable in 1 mA steps- number of output sockets: 2 pairs- timer and pause function- delivery, installation, disposal of packaging and serviceIf a manufacturer or service company is involved, the gel chamber can be supplied with a For all devices, the availability of the technical support must be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m." The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A fermenter with the following performance parameters is tendered:- Fermenter with control tower for pH value, temperature and pO2-control- External interfaces: 2 signal inputs 4-20 mA, Ethernet, potential-free alarm contact, USB, interface to circulating cooler, interface to external pump,- Stirrer drive: maintenance-free direct drive,- Fermenter working volume: 0.6-5 L, material borosilicate glass, stainless steel,- Cover ports: 3 x 19 mm, 3 x 12 mm, 8 x 6 mm,- 3 integrated pumps for z.B. Acid, Base and Antifoam, fixed speed (on/off): speed min. 40 rpm, fast-load pump head,- 1 external pump: speed max. 200 rpm, speed controlled, fast-load pump head,- temperature sensor with 0.1 oC resolution integrated in pH probe,- pH probe,- reusable pO2 probe,- transport, installation, disposal of packaging and serviceIf a manufacturer's or dealer's warranty is given, this must be stated.For the device, the availability of the technical support is to be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m. "The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A ball mill with the following performance parameters will be tendered:- Vibrating mill: circular vibrations in horizontal position of the grinding vessels- For dry grinding; wet grinding; cryogenic grinding; cell disruption with reaction vessels up to 20 x 2.0 ml quick-clamping device with self-centering device - 2 grinding positions - Screw-on grinding bowl - Grinding bowl sizes: 1.5 ml / 5 ml / 10 ml / 25 ml / 35 ml / 50ml- Oscillation frequency setting: digital, 3 - 30 Hz- 9 storable programs- 2 PTFE adapters for 10 reaction vessels 1.5ml and 2.0ml- 2 adapters for Falcon Tubes- Transport, installation, disposal of packaging and serviceIf a manufacturer's or dealer's warranty is granted, this must be stated.For the device, the availability of the technical support is to be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m. "The institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A separator with the following performance parameters will be tendered:- Solid shell disc separator for separation and concentration of biomass - Motor: 1.1 kW - Bowl volume: 2.2 - Solids space: 1.2 - Speed: up to 10.000 rpm- Drum with disc stack and separator hood made of stainless steel hoses for feed- and drain- Closed liquid discharge of the clarified phase via a centripetal pump under pressure- Controlled via motor starter Unit with housing cooling by fan Mounting and cabling of separator and control on mobile stainless steel square frame- Each for product inlet and outlet of the clarified phase DN15 stainless steel pipe with dairy screw connection- analogue flow meter (DN15) (inlet only)- manometer (DN15) (outlet only)- manual diaphragm valve (DN15)- sampling tap- sight glass- transport, Installation, disposal of packaging and serviceIf a manufacturer's or For the device, the availability of the technical support must be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m." The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A quick freezer with the following performance parameters will be tendered:- Design: self-cooling- Outer and inner material: stainless steel- Capacity: rapid cooling: from +90oC to +3oC - 21 kg in 90min- Capacity: shock freezing: from +90oC to -18oC - 15 kg in 240min- Electronic control system- Crosswise insertion- Hygienic design with rounded corners- Core temperature sensor- Soft and hard cooling or Frost function- Program storage options as well as defrost function- Equipment: up to 2 x GN 1/1 or 5 grids 600x400 mm interface for data transfer- Transport, installation, disposal of packaging and serviceIf a manufacturer's or dealer's warranty is granted, this must be stated For the appliance, the availability of the technical support must be stated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m. "The institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A circulating air oven with the following performance parameters will be tendered:- Radial fan steam injection incl. PRO control, softclose- Vapor extraction hood- Fermentation chamber stainless steel doors, 16 supports Dimensions approx. W: 915 mm H: 820 mm D: 840 mm- Installation service- Baking chamber and exterior panelling in stainless steel- Oven with steam generator- Manual control- Baking temperature range 0 - 250 oC- Time control 1 - 60 minutes- Continuous operation button- Built-in steam injection with fan standstill- 2-stage baking chamber fan- Acoustic signal at end of operation- Automatic door opening- Door limit switch- Manual exhaust air control- Glass door- Delivery ready to plug in (CEE Europlug)- Transport, Installation, disposal of packaging and serviceIf a manufacturer's or For the device, the availability of the technical support must be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m." The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case. A NIR spectrometer for the identification as well as the quantification of substances in biomass and soil with the following performance parameters is tendered:- Wavelength range: about 1000 to 2500 nm- Heatable sample chamber or possibility for calibration stabilization (analysis under different temperatures)- Reduction insert for sample chamber- Possibility for measurement of background spectra- Data system, which can be used for control of the spectrometer optics and for signal processing- The software allows sample measurement with subsequent qualitative and quantitative evaluation- Methods: Calibration packages for the analysis of feed raw materials for parameters such as moisture, fat, protein, ash, fibre content, but also for environmental analysis (Bo-den) - Calibration software for the in-house development of new calibrations - GMP compliance - Transport, installation, disposal of packaging and service For the device, the availability of the technical support must be indicated as follows: "Answers to technical questions will be given within X hours on working days from Monday to Friday between 8 a.m. and 6 p.m." The Institute is expected to move into new premises in the Technology and Start-up Centre Bad Belzig in the first quarter of 2020. As the landlord has to carry out appropriate alterations beforehand, especially in the laboratory area, the move-in and thus also the delivery dates of the equipment may be postponed by about one to two months compared to the current planning. The exact delivery dates must therefore be agreed in each individual case.

Opportunity closing date

06 February 2020

Value of contract

to be confirmed