Germany - Electrical machinery, appliances, equipment and consumables; lighting

Description

The plant for industry 4.0 must be able to be used for the fully automatic production of a three-part workpiece of up to eight different end products. The desired composition of the workpiece must be selected visually via a touch panel and stored on the RFID tag of the workpiece carrier when production is released. The RFID tag of the workpiece carrier must inform the processing stations of the combination in which the workpiece is to be assembled. It must be possible to manufacture at least eight different products. After completion, the final product must be taken out of the production process and prepared for dispatch.the complete networking of the stations via PROFINET must ensure continuous function monitoring and diagnosis.the following features and functionalities must at least be present:- transport system: double belt conveyor belts with variable-speed DC drive motors,- identification system: an RFID identification system serves to transmit the workpiece composition to the processing stations,- planning level: creation, programming and testing of any system composition using 3D virtualization..,- Control level: Creation of production orders at the control station PC; process visualization and production data acquisition,- Connection of the process control station to TCP/IP,- Didactically prepared ERP system with MES and SCADA,- Connection of smartphone, tablet and notebook via WLAN,- Networking via PROFIBUS and PROFINET,- Station singling,- Station assembling,- Station processing,- Station handling,- Detailed and detailed description is part of the service specification/loose sheet. With the training system for control engineering, the learner is shown the basics of control engineering as well as further topics and taught in a practical way. To this end, modern training systems such as digital controllers and multimedia training systems are to be used in order to impart the necessary action competence to the trainee. An appropriate experimental board with connected measuring and control interface as well as the corresponding course software with multimedia learning environment shall be used for this purpose. The intelligent computer-supported measuring and control interface is the central device of the system. Systems with experimental cards, plug-in boards or experimental boards such as the experimental board "Practical introduction to control engineering" can be connected to this interface via a bus. It must provide the inputs and outputs, switches, sources and measurement equipment required for experimentation. The interface should be controlled via a connected (Windows 10) PC, a notebook or a tablet using the associated interactive multimedia course via USB or WLAN. the system must be able to be used completely independently in the laboratory, at the workplace or at home. the measuring and control interface should be designed in such a way that it can also be used as the central device of the system for further planned purchases (2 mm plug-in boards and experiment cards for electrical engineering). the detailed and detailed description is part of the specification/batch drawing. This equipment includes a radio controlled Smart Home system. It is a central system, which also requires access to the Internet. All important building functions such as: - lighting control, - heating control, - blind control, - monitoring of windows and doors, - smoke detection, - remote alarming via SMS, - energy consumption control, Smart Metering. Must be feasible with this system. It must be possible to extend the system with other commercially available Z-Wave components. Furthermore, it should be possible to impart basic skills in the field of building system technology/protective measures. The detailed and detailed description is an integral part of the service specification / lot sheet. Equipping a welding trainer laboratory (Virtual Welding Training Systems) with 2 training placesProduct requirements:Welding trainer for 2 training places, which includes the welding processes: MIG/MAG welding, manual arc welding, TIG welding with/without filler material, MIG/MAG welding (flux cored wire). the detailed and detailed description is part of the specification sheet. 1 piece of bench milling machine - swivel milling machine with accessories, new, deliver, erect, set up, demonstrate and instruct the main operatorsThe detailed and detailed description is part of the specifications / lot sheet. 13 Desktop PC with monitorThe detailed and detailed description is part of the specification sheet. Delivery of 3 Smart BoardsThe detailed and detailed description is part of the specifications / lot sheet. Delivery and installation of a:Swivel bending machine with segmented upper beamBandsaw fully automatic2 500 x 4 NC plate shears TafelschereThe detailed and detailed description is part of the specification/batch sheet. Delivery of one:FDM/FFF 3D printer each, from 300 x 300 x 300 mm print volumeAscan-SP 3D scannerThe detailed and detailed description is part of the specifications / lot sheet.

Opportunity closing date

23 August 2019

Value of contract

£100k-1m